The Jalopy Journal
This car was at the Beech Bend event last weekend.
Well we’ve finally got the dragster finished and cackled it at the Wally Parks Nostalgia Nationals this past weekend. Some photos....
Hilborn fuel pump pulley for Flat Head. Has been in storage in climate control since 1962. [ATTACH][ATTACH]
Joe Hunt Magneto with plug wires. This will fit 241 270 dodge and other short deck hemis.
[ATTACH] 20’ ring slot parachute. Has been stored in climate control since 1962 In extremely good condition. 1950s surplus chute purchased by my...
Engine is in with just a little wiring and plumbing.
Thanks for the info. I was lucky that the frame has always been stored inside. We did as thorough a check that could be done including some repair...
Making a lot of headway. Engine goes in next week.
Have the engine/powerglide mounted with handmade firewall and handmade motor mounts. Dad is doing all the Fab work and he is 85 years old.
Also made a oil filter bracket to clear frame and supply remote oil filter
Finally have the engine mounted with handmade motor mounts and firewall.
Finished disassembly of front end. Cleaned 4 layers of paint off front axle. Cleaned and cleared the axle. Not going to Rechrome from axle.
Disassembled front end for cleaning
First time on flat trailer.
Right now we don’t plan on making updates to the frame. It is very hard to find a car that hasn’t been modified. It will be a cackle car.
Today cleaned up all the added tabs and brackets that weren’t original. Found 3-4 places that will need to be tig welded but no major issues.
C/D was for small cu in and lite weight cars. D/D was for flatheads in-line 6 and other combos. C/D couldn’t exceed about 4 lbs per cubic in. Max...
Dodge Hemi
160” George Wepplo SEMA tag 43 with Creitz 16” spoke wheels. 260 cu in Dodge Hemi with hilborn fuel injection. Frame found with no changes except...
Welcome to the Rotofaze owners club. Probably only about 12 of us that have a working version. Sent from my iPhone using H.A.M.B.
[ATTACH] Sent from my iPhone using H.A.M.B.
Here a photo of what I described earlier. Sent from my iPhone using H.A.M.B.[ATTACH]
There are two valves which control the fuel. The first valve is a supply shut off valve which typically is mounted on top of the metering...
[IMG] Sent from my iPhone using H.A.M.B.
Very common our car has original Anglia wheels and Olds Toronado rear wheels. [ATTACH] Sent from my iPhone using The H.A.M.B. mobile app
Tony. Good luck this weekend. See you in Knoxville. Sent from my iPhone using The H.A.M.B. mobile app
Here’s our 241 Hemi. [MEDIA] Sent from my iPhone using The H.A.M.B. mobile app
The Bosch blue coils and vertex condensers are really good. We run the same combo on our Dual cap rotofaze distributor. Gmcbubba recommended those...
[IMG] Sent from my iPhone using The H.A.M.B. mobile app
Thanks for the photo of our car. Sent from my iPhone using The H.A.M.B. mobile app
Separate names with a comma.