The Jalopy Journal
That's true. I mentioned this measurement because it's the same (3.75") as the genuine Lincoln 1939-48 rear drums.
The width of the 1940-48 Ford drum is 3.75". It appears that the wheel bolt face of the Boling "Lincoln" drum is thicker than original Ford, and...
I’ll take and post a closeup shot next week when I’m back home again. Sorry but the color in the pics are a bit misleading. The wheels are...
I also have a set Fish Ent. wheels that I purchased 1987 in La Crescenta and they're still unused...... Here are some pics. [ATTACH] [ATTACH]...
Here's another alternative; Willys 1939 tie rod ends [ATTACH] [ATTACH]
Lincoln 1947-48.
Federal Mogul Thermo-Flow heads made September 22, 1936. [ATTACH]
Here are 2 threads about the Bell Auto dropped axles:...
I fully agree to @alchemy's statement and here's another picture of Bob Bauder's '32 sedan. I found this fold out poster in the old swedish hot...
I've got this NOS Style-Lite light from Jay Johnston's StyleCraft in Bellflower, CA and there's no ZIP code so I'd say 1950's.[ATTACH] [ATTACH]...
That's a nice gauge! I believe it's for a 1934 Hupmobile.
The original 1932 Ford steering wheel was 17" so there's plenty of room for it....;)
These are the steering wheels that Bell and Ansen offered in their 1949 catalogs: [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I'm looking for Lincoln 1939-40 front brake backing plates in good condition. One or two will work. Original Lincoln/Bendix plates only, not...
I saw Paul in his home 2015. He was really a great, interesting racer and hot rodder that among other things had a soft spot for the 21 stud...
Here's a set 1.75" wide at $64.95...
1936-55 Buick (Bendix type) brake shoes are 1-3/4 x 12". They should also fit the Bendix type brakes that the Lincolns had 1939-48. There are...
It's from a 1932-33 Hupmobile[ATTACH] .
As originally advertised and used in a slingshot dragster: [ATTACH] [ATTACH]
Sorry but there's only one picture of the Bugatti angle drive in the catalog, but here's a close up pic. The angle drive casting is bolted on a...
Yes, do that and take a look at the hydraulic brake conversion kit from the Early V8 Garage. They make kits that doesn't require any cutting,...
Here are some dropped axles Johan did last year. He usually drops a batch of axles sent to him by fellow hot rodders in Sweden once a year. [ATTACH]
No need for you to buy a dropped axle overseas in the U.S. Just send a good core to Johan Törnqvist in Nyköping. He drops '28-31, '32 (heavy) and...
The angle drive is from a french Ford Vedette 136 cu in 60 hp flathead.
Like this one recently serviced by Tom Cirello...?;) The Scintilla Vertex mag with angle drives for the Ford flathead and the Bugatti 5 L engine...
Hank, Here's a very nice traditional hot rod with a '29 Brockville roadster body built on a '32 chassie in Sweden by a buddy of mine. I suggest...
I have this dual magneto angle drive aluminum casting. Unmachined and no drive gears though. I believe it's made for a Ford flathead, and it's...
The owner of this Tudor is my nephew's uncle....;)[ATTACH]
My vote for best reproductions goes to the VintageHals made by Paris Fish. Sand cast and machined in Los Angeles during the 1980's. Too bad that...
[ATTACH]
Separate names with a comma.