The Jalopy Journal
hi 31apickup, hope you dont mind me asking the following. I'm setting up the same setup (split bones and cross steer) but are concerned that if...
anyone else? any pics showing front crossmember and firewall clearance would be greatly appreciated. cheers julian
to those that are interested, i ended up finding the advance plate had a wobble in it (years of wear i guess) and when the vacuum was high (idle)...
Hi Hambers Any members out there set up a 350 chev in an 33/34 ford pickup? Did manage to get motor fitted with the harmonic balancer fitted in...
Hi Oldtimer, yes still has the original leather, and is hard but i soaked in oil for a week and it softened up somewhat. i do have an old toolbag...
Hi All Running a flatty with crab distributor and petronix module and car runs fine, but have an issue with a rattle noise coming from crab...
hi timwhit, have sent you a pm, (to see if parts are still available) cheers julian
thanks all, being in Australia i had to order online and get the correct size. cheers julian
thanks all for your replies, ended up getting some online cheers Julian
Hi all What size inner tube are people running for firestone 500/526-16 tires? I'm in Australia, and its hard to find that size around here, so...
I'm concerned as I stated before as I'm in Australia. I'm building a 34 pickup and have a few old Harley's that I would love to leave to my son...
Hi all I'm super aware of the future and the introduction of autonomous cars. With the expenential curve towards AI (artificial intelligence) I...
there was a great thread on here where a chap pulled the inner frame section and used it to box the other side, it was a neat trick and looked factory
On 32/33/34 ford pickups I like the length of the bed to be around the same as the hood. I also find the height of the car makes a difference as...
check the voltage across the battery terminals when running, and compare these to the voltage on your voltage gauge. if there is a difference it...
in Australia 15k to 20k
yep, 3 degrees, works for me
Wow! you guys are absolute legends! Thankyou very much to everyone who has helped me out.
Hi All Thank you very much for your replies and PM's, its sounds like the Pollak 6 Port Valve is the best item for the job. Has anyone got a...
Hi Hambers I have a Columbia Overdrive I want to use in my pickup project, but are looking to control via a toggle switch on my dash that will...
Hi all, looking wiring up a ford pickup with a ez wiring 20 circuit mini fuse kit. Issue is I have one cable ( red , 3 foot long) that is...
hi all, setting up my 1934 ford pickup with side steer and have come across an issue. I am using a 56 f100 steering box with a 57 arm and have an...
great thread, but anyone know anything about these arms, very, very deep drop. cheers julian [IMG]
Cheers for the replies guys, it kind of answers my question that these are a good idea but just dont seem to work (well not on an original chassis...
Hi all Im putting a 56 f100 steering column into a 34 ford pickup and was looking at using a tardell/speedway wedge (not the weld on flange for...
Looks like the springs in the drums where strong enough to squish the brake cylinders and push the fluid back into the master cylinder. Did you...
Im guessing and im no expert. Left drum has locked up, or right has failed and steered you left at high speed. So left wheel starts skidding...
spark plug leads not connected in the correct order? cam timing out a couple of teeth? distributor 180 degress out? cheers Julian
hi all thanks for all your help, Ill be waiting till the weather clears up and with the help of the owner investigating it a bit more, as he could...
Separate names with a comma.
The Jalopy Journal
