The Jalopy Journal
I have a Milwaukee Porta Band mounted to an upright stand. It has changed the way I do things.
I have been using my Miller Challenger 172 for nearly 20 years. It has worked well for me for both sheet metal and up to 1/4" material. I also...
Mine is 24 x 40 with 10 ft ceilings, and two story. It suits me just fine, but, if I had it to do over again I'd go bigger if I could with taller...
I have pondered doing the same thing. I did speak with the gentleman from Blackboard in Central Valley, Ca. and he had no problem with a pinched...
In my '33 Ford pickup I'm using a Column from a '60's Ford Falcon Van. I removed the center from the original Falcon wheel and installed it in a...
73
4 inches on my '30, current project[IMG]
Thanks for that!
Thanks everyone. The photos I post are on my Google Photos.
If my pictures have been X'd. does that mean they were deleted by the board or is something else going on? Had to ask.
Yes, running the Volvo rotors, the same setup that Hotrod A posted. He shows a better view. I personally like them and I guess they could be...
Here you go. Now nine people I have sent this to. You'll see something similar on early '50's GM and Plymouth. Glad you like it! Good Luck! PPG...
I run the Vovo 122's on my coupe. They work just fine. [IMG]
[ATTACH]
All so creative. Really dig it!
Installing one in my current project. '30 Coupe. [IMG]
cats meow right there!
I am partial to the '30/'31's with '28/'29 fenders!
That sure cleaned up beautifully!
I used Bills brackets in my 40 pickup, mounted the air conditioning and the alternator above the valve covers. Worked great!
Set up using a Zip's water pump riser [IMG] [IMG]
[IMG]
Great shots, Thanks!
It seems to me, whatever you do is going to take some time, and maybe the best time spent would be to move the master cylinder and booster over...
Some cool cars out your way!
Maybe call it a Sports Coupe and you havn't installed the top yet!
I have a Rootlieb hood on my coupe and it is great but did need some modifications. No fault of Rootlieb! In your case depending on your...
I have one of those Harley horns and I'm still holding on to it!
I can't believe my last post was in 2013. As it turned out I completely blew the car apart so I could flip the frame over and finish weld...
Here is a '36 in my current project. [IMG][IMG]
Separate names with a comma.