The Jalopy Journal
The problem is the back side where the metal would lay is less than 1/32" thick on it's edge. The other side is the chromed surface so can't...
Lord just contacted me and recommended their Fusor 110B/111B for my use. Going to give it a try.
Thanks !!
I have a piece of white metal grille that I need to attach a bolt to. It is only to hold some expanded metal in place but of course I can't weld...
Yeah, I had a "good mechanical one" and after short order it failed and the power line heated up and started melting. Those are made by the same...
So I have a 50s Ford with Drum/Drum. It use to have a single master cylinder but after following the directions here I swapped it to a early 70s...
What is the required spring for the rear spring on the pressure rod?
I know this is a dusty posting but, ... anyway. Is the vacuum port that was used for the wipers which is located in front of the Carb on a...
It's the valve covers NOT the intake or valley.
The two that hold the valve covers down. The oil is weeping it's way up the threads and over the nuts.
I know this is an old thread but here goes. What do you do for the threads on the bolts? Mine seem to be acting like an Archimedes screw with...
Some snaps of the rides. If you have more stick 'em up.
Folks if you have not been to The Fall Out either I strongly recommend it as well. Been to many and always worth the trip from Boston.
Well the front wheel cylinders on the Edsel have a bore size of 1.125" and the rears are a bore size of 15/16".
I see in the Pony site that they sell external residuals and Cardone tells me their M/C has none so I should get a pair.
Did the 67-69 Mustang Drum/Drum have a proportioning valve? Can't find a listing online. Or would anyone know a universal one that would work...
Hi CS, No, keeping it drum/drum as it is. Just want to have that feeling of comfort you get from two reservoirs. LOL
Do you need a proportioning valve when you swap in the Mustang Dual Master in Drum/Drum set up? I have a '59 Ranger with a single and want to...
JUST 1 DAY LEFT to book a room at the discounted $109 bucks. Don't get stuck paying full price, Book your room. Call the Best Western Royal...
This is a recent list of the Bands!![ATTACH]
They just created a all access pass for Saturday so people who can't make it a whole weekend can enjoy a full day and night of fun. The Hotel...
Anyone looking for something to do the Weekend of July 13th 2017 check out the VIVA EAST ROCKABILLY WEEKENDER AND CUSTOM CAR SHOW...
They want $579 for it which I thought was high. Was not sure if it was something they modified or some else off shelf part.
I am interested in their "FORD FULL SIZE POWER CONVERSION BOX 52-64 FORD FULL SIZE" Part #800115 Has anyone used one on their ride?...
Well that was easy. Thanks all. Got a set of MOOG CC851 from rockauto for $56. Not as short as Aerostar coil. Jacked then stands on both...
My friend Andy let me use his car, He was leaving for the Navy and the State Trooper who did the road test was former Navy so those two just...
Ok, I have a 50s Ford and will be putting in Moog CC850 Aerostar springs. What shocks have the right specs without bottoming out? Saying 90's...
Separate names with a comma.