The Jalopy Journal
Negative caster? You're talking positive caster here.
What does "checked out good" really mean? Magnafluxed, crank bearing surfaces, cam lobe wear, cylinder taper, valve stem and guide wear, valve...
Definitely valve train! Valve stuck closed.
Never seen 94s oriented that way!
My Gotha adjustables are still operating the valves quite nicely. #10 heads. Valve springs are 440Dodge. Crane hydraulic lifters. TRW 3/4 Full...
A Mumford Link is more compact than Watts Link. Also, zero side deflection. Google for what they look like - if you care to know.
Also, check carefully for porous casting. Mine had an almost imperceptible hole in a runner. I filled it with J-B weld. I know where the repair...
Many were expanded to three bays. One bay needed to be available for grease jobs, oil changes or tire installations. The extra bay allowed for...
Polish that intake! It'll put a smile on your face. Do not be concerned about potential value in rough casting form. Leave the Edelbrock logo...
If they did, the wheel offset would be a ridiculous amount. However, an adapter is made to go from 5 1/2" to wide five (10 1/4").
Agreed! I remove these plastic sleeves and solder the connections. Usually I'll use a colored shrink sleeve (same color as the wire). Have...
324 Olds in 1916 Roadster Pickup, 4spd Hydro, Quickchange, 4 Ford/Holleys
My 324 Olds is running .125" overbore and JE forged 11:1 full skirts on .008" cylinder wall clearance. A bit noisy on initial start-up, so a...
Separate names with a comma.
The Jalopy Journal