The Jalopy Journal
[ATTACH] Car Has been sold!!!! Body off frame, blasted and painted. Body is original. No rust. Running driving project. Instrument cluster...
Looking for some suggestions on a set of mirrors for my car. I have the curved 4 in peep mirrors and they are almost useless. Been looking...
I have a reworked oem radiator out of my car. Was using it prior to the engine swap. Has been rodded out and pressure tested, then I used it for...
I have a new old stock aftermarket fuel pump. Says AC Delco on original box. Also a rebuild distributor. Distributor is single point. Water...
Looking for advice for wheels for my 41 Ford deluxe. It's dropped with a axle and reverse eye springs. I have disc brakes on it so I gained...
I have one set from a engine I sold for a block, all from that engine marked 8ba, for $50. I have a milk crate of rods from various years that I...
Original to the car, I had it rodded out and cleaned at a local radiator shop. Ran it with my car for 781 miles, then I pulled the flathead. New...
City: Warrenton State: Missouri Price: $sold good working 12 volt alternator and bracket for v8 flathead ford. I had it on my 41 ford. Worked...
I have two large cleanout oil pans. Both are filthy dirty. Good usable shape. You have to pay shipping. I have several stock style items to...
City: Warrenton State: Missouri Price: $sold City: Warrenton State: Missouri Price: sold Sold Rebuilt and good 12 volt solenoid/ coil for a...
City: Warrenton State: Missouri Price: $400 USD City: Warrenton State: Missouri Price: $$275 City: Warrenton State: Missouri Price: $275...
I am in the process of installing a small block ford in my 41, and i am in a situation where I have the shallowest oil pan I can get( explorer),...
Posting this add for a friend Larry. This transmission was said to rebuilt by previous owner, but no paperwork. This comes with the everything...
I have a fresh rebuilt r-10 overdrive with a 12 volt solenoid. Also running a slip yoke tailshaft. I am told this was original to a 50 mercury....
City: Warrenton State: Missouri Price: $800USD [ATTACH] I have 2 nice 8b, 8rt blocks with cranks and pistons. Both have been disassembled...
Going to get some glass cut for my 41 Tudor tomorrow, and after I had the windshield done in tint, not sure what the results would be with tint...
Just got the 41 on the road, and runs great. Now the problem. I burn/spray a quart of oil in 100 miles. I had the heads off the engine, and...
As many posts as ive read on this topic, im still at a loss. 5 break downs after about 45 mins into a drive. So just got my car up and running...
I dont have one, but i am looking for some pictures of any that are out there. I hate having to carry a plastic cooler, and cant do the soft sided...
I am getting ready to put some wheels on my 41, and looking for some options that would still fit the traditional-ish look I'm after. I've kinda...
Hey fellas, close to getting my 41 driveable, and looking for suggestions on where to mount the overdrive in/out cable. I've never owned/driven...
Looking for someone to rebuild my front and rear seats on my 41 Ford tudor. I am wanting somthing custom, as in not oem fabric. I am in Warrenton...
I was looking through the posts for a paper filter for my oil bath, and found a few options. Being hard headed, nothing quite did it for me. May...
Looking for some info on how/what was can be used to install and press on these bushings. I cant seem to find any info on how to install, maybe...
I have just begun learning how-to lay down paint. My first question, ive bought into the PPG shopline brand of paints. Are they of good quality,...
Building a 41 Ford, and set the body down temporarily on it last week. Noticed a slight lean in the rear, like 1/2 to 3/4 depending on how moved...
Needing some input from the brain trust here. I have a 50 Mercury borg warner od transmission ( with complete rebuilt) with a slip yoke...
Started to prep the block for new gaskets and uncovered that the block was sleeved. Is it safe to use the gaskets that I have in the picture?...
I have done a little research on the hamb, but haven't came to a conclusion yet. I have a 41 Ford, stock flathead 8. I bought the correct year...
Just opened up my 41 ford v8 and am concerned about the amount of rust in the water jacket. It's a low mile car that has been stored for a long...
Separate names with a comma.