The Jalopy Journal
msd
what is altitude where you are at. Carb may be jetted lean as hell due to denver altitude. try swapping carbs. lean equals hot/overheat
Lets be real. No VIN does not make my bank happy when I am borrowing 10-15K on a car on the other side of the USA. Maybe some of you have that...
BTT thanks
headers will fit if you swap to a 68-70 B body K frame fyi. car won't be super stock legal either as it sets motor back slightly . some of above...
I installed a roller dakota pilot bearing in my 68 valiant sedan. Motor was 360 magnum (98) converted to carb, and 71 close ratio 4 speed, Mcleod...
make sure they or you do not use a impact on the flex plate to crank bolts. use torque wrench or it will crack the flexplate if it is to tight....
mopar 4 speed is only good to about 500ft lb of torque. After that they start blowing up third gear. high torque stroker motors and 23 spline 4...
400 is low deck with shorter cylinders/thicker main webs (less flex.) anything a 440 can be built into a 400 can be built into and be a better...
very nice you are an inspiration to us. keep the pics coming lol
mark williams axles not a fan of moser. strange is also good but mark williams is a cut above.
please get rid of that flex fan. I attached a photo of a guy who had one blow up while tuning his car. Doc said inch either way and he would have...
Separate names with a comma.
The Jalopy Journal