The Jalopy Journal
best advice I can offer is to talk to Clive at Stromberg or Uncle Max at 97express. I emailed them both for tips on tuning up my stromberg 6x2...
13 9/16 " top and 13 5/8" bottom on mine.
Larry, looks great! that was the photo I was waiting to see. Thanks for the advice on my fuel lines. I was going to post my changeover from fire...
[ATTACH] Seat in my 28 RPU...I'm 6'-1" and had a hard time driving more than 45 mins before needing to stretch. Built a seat that was a little...
I also have the red speedway lines. As a precaution, I replaced after 2 years. The lines had faded and hardened a bit. For what they are, they...
I guess this generated more questions than answers...I did a bit more digging and found that Permatex makes a weather strip adhesive. (3M has...
Can anyone out there tell me the proper way to install the seals on the stanchions for a roadster windshield. I am assuming they need to be glued...
Edelbrock X-1 with six stromberg 97's[ATTACH] [ATTACH]
It seems to depend who you ask, as to what actually makes a rat rod. I think they are "art cars" with everyday items re-purposed as components,...
I am still learning the ins and outs of tuning a Stromberg multi carb setup. We went all-in and started the learning on a six carb progressive...
There is no vin on the block. Unfortunately I cannot access the date on the back of the block[IMG] Sent from my SM-G920W8 using H.A.M.B. mobile app
Casting number 3970010. I'm just interested to know what it is that I have. It's running and driving in our model A RPU. We were in our first...
heads have been changed...so no luck there. i'll get the casting number later today
Can anyone out there help me with an engine code? V0526EBM from what i can find online the V=Flint 05=May 26=26th...but EBM is a suffix i haven't...
Thanks max. I'm still chasing small leaks on the float bowl/ air horn gaskets too. One day it's good. The next it's seeping. I guess my efforts...
Thanks for the advice. I used a little gasket dressing on the jet plugs and it seems like it worked. It's been a couple days with gas sitting in...
Look on YouTube for videos by Lazze metal shaping. Lots of info there. Sent from my SM-G920W8 using H.A.M.B. mobile app
Perfect. I was hesitant to put any sealant on those gaskets but that looks like the right stuff. Thanks Sent from my SM-G920W8 using H.A.M.B....
Thanks. I e-mailed Max once before for help with jetting....He is a very helpful resource. I'll see about those hex plugs!
Well here it goes..first post on the H.A.M.B. I have been reading it for a while and received a lot of helpful info but i thought i would float...
Separate names with a comma.
The Jalopy Journal