The Jalopy Journal
just dropped in after long absence on HAMB....happened upon this page....happy to see the Morris Minors so well received here albeit many are in...
just throw in any ole engine you want..it is the Flux Capacitor that makes it all work....
the 201 has a journal of 2.249-2.250 while the 218/230 has a 2.499-2.500 so you can see there is a .250 difference, they do share the same stroke...
the install of the 230 crank is going to be quite invasive to the base metal of the block or the crank and if thinking possibly shared between a...
looking for someone in my local area (am near Macon) to help with a car hood front repair section and underlay structure..more than not an English...
going to mark my calendar for this event...for those that have never been to this track..while not huge, it is still in a nice setup....see ya there..
I am very thankful to you for having the foresight to copy this in .pdf format. Monroe no longer supports this page..I know, I had this as a...
you can try the olke bottle cutting method of scoring the glass..heating it in hot water then imersing in cold water..if a good score...
dash would be of least concern at this time..work on stopping the cancer on the body..actually a nice stereo and some AC vents come to...
the resistance of the coil internally is the factor for current drain..running a 6 volt coil on 12 volts will actually double the current across...
I have a large bottle of Molybdenum Disulfide powder, I mix this with oil and make my own paste. This is the gray stuff that used to come with...
This forum has such a variety of models I am hoping that someone would be able to help identify this bumper..I saw this on a car but could never...
Hey how did you know my pit bull's name was Karma...huh?
yeah...but give him credit for getting right in there next to the babes...
I just referenced my books/Allpar site..in 1985 Federal 318 engines went to roller lifters...the truck did not see these till 1988 however though...
I misquoted my own self..it is a roller lifter..not roller rocker....got two of these engines at the house....
you have been called..roller rocker stock in the mid 80's... early 318 had come parts carry over..LA 318 67 up to the magnum..was derived from...
in short..if you want to use the roller block..by all means go for it..there is no special cam..can run the roller on any and all new or...
I think if you have the means to buy and hold the unit you should...if you later decide not to build maybe make a buck or two on resale if your...
You have plenty to work and plenty of support from the P15/D24 side..as it has the flathead 6 you be welcome and in good company..detailing my...
Squirrel...many thanks..two have been spotted in the past by some of our group..neither were identified...nice lines...killer clue is the front...
does anyone recognize this car?
I agree with a locked thread once displayed with edit /reply open only to originator and administrators. This tire kicking wish I were closer...
Here is the latest from the phone call I got tonight. The sector is 3 turns lock to lock..with belt off the pump the car drove like a dream only...
Guys based on what the owner told me it is not so that it has bad road manners..just that the effort to steer is very minimal..I have not driven...
I joined the HAMB some time back..have made posts, bought and sold here..I would have put money I did an intro but doing a search here I did not...
Hey dvanecek.....how are things in Hot-lanta...the Dodge coming along ok? As for the kit being universal..can't answer..just got familar with...
Unclee.....thanks for that information...I have since done a search and found a kit as pictured..looks like this is the animal..be worth a try....
Thanks for all the input here..I may have to drive over and check the caster..other than quick to steer he says it handles nicely...I asked him...
I have not personally seen the car yet, nor have driven it, going on his observations only...he is some 60 miles from me..as the subframe is stock...
Separate names with a comma.
The Jalopy Journal
