The Jalopy Journal
Are alternators HAMB friendly? Anyway, I've got a reman delco 12SI alternator for one of my projects and i'm getting no output. It's hooked up...
Practically new shortblock, has been sitting an a garage. There is some slight rust forming on the cylinder walls. Not pitting or anything, just...
On '53-'53 Chev's, provided you've gone with firewall mounted master cylinder and have a good tranny x-member under the tailshaft, is the stock...
I'm trying to pull the 235/3speed out of my '53 210. what exactly do i need to do to separate the torque tube from the transmission to pull it...
Who was it here that has a '53-'54 with a fiberglass tilt front end, gasser style? I did some searching but didn't come up with anything. Is there...
Has anybody here installed a late 80's camaro front clip on a '53-54 Chevy car? I'm considering doing this as an alternative to repairing frame...
Hey guys, were can I find some cluch head bits that won't cost and arm and a leg? The kind with the socket base to use on a ratchet. I have a...
Ok, I'm finally getting around to putting my ECI front disk kit on my '53 210. My question is this, has anybody ran the stock master cylinder on...
I'm currently doing the ECI front disk conversion on my '53 and I need to remove the inner races that come in the rotor and replace them with the...
I'm getting some conflicting information here, so i turn to you guys to set me straight. I have a small Lincoln 110 MIG (well, flux core for...
OK, I'm starting to get the interior on my '53 together, but I can't decide what to do about a floor covering. I don't want carpet, and my...
I've been wrenching on cars for a little bit now, and I've never really added welding to my skill repetoire. Now that I've got a project that...
I'm looking to get a MIG and trying my hand at some patch panels. Of all the little gas/gasless MIGs out there for cheap, what is a good one to...
Blowing as in forced induction, not blowing up. I've done plenty of that myself. Has anybody ever seen or put together a supercharger setup on a...
Hey guys, I've got a dumb question I hope someone will answer (without too much shame on my part). My question is about the rocker panels on my...
Hey guys. We were having a discussion earlier at work about some of the goonier floorpan\board substitutions we've seen in our days. Everything...
I'm wanting to get 3" or 4" whacked off the roof on my '53 210. Can anybody recomend somebody who can do this for me in the southern Arkansas,...
I'm just about at the drivetrain stage on my '53 210 and I'm still undecided. Maybe you guys can help me out. Right now it has the stock 235 with...
Hey guys, I"m still planning some stuff out for my '53 and i'm trying to decide on it's motorvation. If I stick with the 235, is it feasabile to...
I finally got some taken. As you can see, it's a good little project... My '53 Photos
Hi guys, I've been lurking here a while, so I decided to finally introduce myself to you good folks here. My name is Michael, I'm 25, I live in...
Separate names with a comma.
The Jalopy Journal