The Jalopy Journal
Today I added a small reinforcement to the bottom of the motor mounts. Some befor and after...
Done a little work today. I got the fuel filler/cap...
Some more[ATTACH][ATTACH] Sent from my iPhone using The H.A.M.B. mobile app
I got some more done this weekend. I’m slowly picking away at it. I got the steering box mounted and the wishbone mounts...
Not sure I got the cylinder and push button from eBay. The cylinder is 2 1/2 bore 1 inch ram with a 8 inch stroke. It produces 786 foot pounds of...
I built this yesterday. It crushes cans really flat.[emoji846][ATTACH][ATTACH][ATTACH] Sent from my iPhone using The H.A.M.B. mobile app
Anyway took a little bit to get to it. I got the arms bent to where I need them.[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH] Sent from my iPhone...
I will post some more pics soon. I can send you some too. Sent from my iPhone using The H.A.M.B. mobile app
Thanks Sent from my iPhone using The H.A.M.B. mobile app
I just realized I’m pretty sure. I posted none of this work. [ATTACH][ATTACH][ATTACH][ATTACH][ATTACH][ATTACH] Sent from my iPhone using The...
So not been doing too much. Doings small things here and there. I finally got around to bending the steering arms and got some steering linkage...
Box is not attached just clamps. I think I got this figured out . Did some reading and pictures above helped. Will be swapping out oxygen tank...
No not up side down. They are 47-48 wishbones if I remember right. Sent from my iPhone using The H.A.M.B. mobile app
I do have engine transmission in car. The pictures above are what I was looking for. Thanks Sent from my iPhone using The H.A.M.B. mobile app
Looks good nice you finally got to drive it[emoji846] Sent from my iPhone using The H.A.M.B. mobile app
So I’m looking for thoughts on how this should be handled to get steering to clear. Like most I can’t really afford to do the wrong thing. If you...
Well have not been doing too much. I got the front post looking good. When I did the chop. It made it not look right. I also did some work on the...
Done some more work. I got the axle degrees set and the wishbone's mounted.[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
85 to 87 Chevy truck [ATTACH]
Here are 2 more pictures. My 9 year old daughter just came down to the garage. She saw it and said cool dad.:cool: She's my future hot rodder....
Did some more on the floors. I also took it off the frame table. Looks way different on the floor. I like it alot this thing is going to be...
Did some more work this weekend. Slowly picking away at it. I did some more on the floors and started putting in a battery box.[ATTACH] [ATTACH]...
Finally got around to doing some more work on the car. I started building the floor. I got the tunnel built and left and right front floor boards...
Long as everything is centered. I don't see a problem with a spacer.
It will be around 110 inch wheel base. Give or take a little.
You got my vote.
When it comes time. I'm going to buy some stainless round stock and make one.
I figured it would sort it self out. I do have a grill shell just no grill insert. There are pics in post 133 and further back in thread.:)
Did some more work on the car today. I had to notch the frame in the front. Spring was going to hit. I also made a spreader bar. Then I got side...
I would not expect much from it either. I got it about 3 years ago. I had stopped off at a moving sale it was at the end. I bought some things ....
Separate names with a comma.