The Jalopy Journal
agreed... but i want the overall look and can live with the door being more like an A... had mine open once, took 2 weeks to get it to close... my...
got nuthin... but a buddy just picked up a reasonable '30 cowl may be for sale ? p m... me if you are near enough to 04210 for "you pick up" to...
yup ...
hamber wants info ...
brake pedal pulls... mechanical brakes... pre 1939... part # starts with 81... memory says that is 1938...
paint the inside surface of the housing white... do it to your tail lights too...
I would replace the support wood with steel tube, 3/8" shallower [left to right] than the stock wood... 3/8" hardwood trim moldings [lowes, home...
welcome... look for the stamped letters LB on the block left side, front, beside the edge of the intake... means large bearing or modern style...
depending on the tag's style... like the cluster upsidedown... [ photo-shop ? ]
never seen 'em before...
hello ct, welcome aboard, lots of info here... just ask the boys...
42 will have window surround chrome, not sure on ribbed beltline... 46 will have ribs in the beltline chrome... has window surround chrome... 47...
bttt
the mods say early east coast, channeled not chopped... mikie likes it !
had a '33 frame no front crossmember, bent in 1/2", buddy makes the beer brewing vats, had me heat the inside of the rail red hot in a vertical...
check jeeps, they used ROSS steering boxes... some were set up to use the pitman arm upside down [pointing up] so it goes well with steering the...
drove a '33 fiver for 19 years, cranked the windshield in or out at will... now i have a '30 coupe, have to pull over to swing the w/s in or...
i made some roadster molds after hs, we made canoes, if you re-enforce use oak, they told me it would react to temp change closer to the glass...
10" too wide for me... 8.00-15"... i don't see many 8.20-15s out there...
memory says the perch to perch space is the same 28 to 34... even though spring is in front 35, 36 may be the same ??? later post have proved my...
along with the revered eye spring, they sell de-arched springs... both unloaded on the floor it appears to be 1.5" more drop than the revered eye...
selling for a friend, pair of coupe doors, will also fit sport coupe and some fordors... needs a patch panel on both and a bottom on one... has...
46 to 48 ford glovebox door, may fit '42, has the latch catch and 3 of the 4 hinge screws...[ATTACH] [ATTACH] [ATTACH] [ATTACH]
mean jean 427 has it... when you heat the screw red hot it bakes the carbon from the steel, when heated it expands and it gets bigger, then when...
older rodder told me they would use the cut down fender brace [lower half] and h/d bar... said the high mounted lights didn't draw as much...
i like it fenderless... but it does have a serious sleeper look with the mud guards ! go v8 coupe go !
i like "areo-kroil" ... then try and break it loose by tightening it, if it strips the slot it doesn't strip it in the unscrew direction......
cool post... bet the new owner will love riding in the thing as much as your dad did... frame that pic !
i kinow it is blasphamy here but i would reverse the whole firewall in case you decide to go small block anything in the far future... more room...
Separate names with a comma.