The Jalopy Journal
You're welcome. This is a dropbox link that you may be interested in. Pdfs of the best I could get from searching various Internet Archives dates...
My McCulloch on a SBC in my '40 Ford convertible [ATTACH]
Brackets summary pdf that I got off the old VS57 site, from Internet Archives....
WOW, WOW, WOW! Glenn
[ATTACH] Pictures backing up this table start on page #5 of the Techno link in my sig. Glenn
Yeah, I think so too but I'm not biased! :-) Thanks
[ATTACH] Here's mine: Original 32 Ford steel roadster - 268 CI 59A block - 4" Merc crank - 0.400 Offenhauser heads - Isky Max 1 cam - Dual...
If the Mustang MC is for drum brakes, the residual check valve is included. It's the perforated top, hex bottom part to the left of the bellows...
I think you're onto a better look with the sectioned '40 bumper. Glenn
Fantastic!! Thanks
38 coupe, on the BARN, has done a great update of various Ford block features and pictures EXCEPT FOR 1941 AND 1942....
Those look great B&S! Good mod on the outlet flange. This is what I made. [ATTACH] [ATTACH]
I did some measurement this after and figure that moving the contact point inward 1" MIN, which is 7" below the top of the exhaust ports. This...
Yes they're bad. That's what I have now with denting I did on the left rear. Glenn
Thanks Tom
Hi Tom, was the facing across all three of the block mounting or just for the collector flange? Glenn
Yes, I just used the picture for reference.
I've heard a number of times that the Fenton headers that Speedway sells have interference issues with the steering box on LHD. Anyone have some...
I too prefer a '32 bumper.
"And your steering box is on schedule to be assembled this week!" Yes!! Black walls and caps look fantastic!
"Yeah, I need to get to work emptying this cart." Yes you do :-) Glenn
Beautiful and love the color! I agree with 19Fordy about the rake and leaving it as is.
Great Kerry, "I use stepped bore M/C's in road racing where the "chicken shit school of braking" teaches us to fear low pedals." You are the only...
I have mine mounted under the floor and on the back of the '32 K member. I used 2" X 4" TS with a plate on the back to get over the bottom bump in...
You’re welcome
No, same bore. Fluid reservoir only is different. I used a stepped bore MC in my '32 so best of both worlds. It works well. You'll have to remove...
the 7/8" bore will be much easier but the downside is, the pedal will be a LOT closer to the floor when applied. You need to check your maximum...
:-))
Excellent!! You are a real craftsman. Glenn
Regarding, "I am converting the banjo rear to open drive, so I have been working on my rear suspension setup. I’m attempting to do the radius rods...
Separate names with a comma.