The Jalopy Journal
sold
I forgot to take detailed pictures but here is one where you can see the cuts:[ATTACH]
[ATTACH][ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] for Holley and Edelbrock 4BBL carbs, very rare 2 piece cast aluminum air scoop. 15”...
That is also a slick solution!
The food room is still good, I`m 6`3" so it is always a challenge to fit me in but it turned out good.
I think it looks better than a recessed firewall and it is not that complicated, I had to do a couple of pie cuts at the cowl radius. Once it is...
Oh, I forgot the part where I spot welded the firewall back with a harbor Freight spot welder that works great[ATTACH] [ATTACH]
Next challenge was to cut the floor and firewall support brackets. I decided to go with a wood floor plate...
Next step was to make a steering column mount and a throttle pedal linkage through the firewall, the shape of the reversed firewall is perfect for...
I got a little distracted from my main project when I traded my 39' Ford for a cool little roadster with a 401 Nailhead. After taking a closer...
I have a nice Austin Healey banjo steering wheel, comes with the steering shaft (it`s cut off ). Should be easy to convert for usage in an...
SOLD
I decided to go with Henry`s oil filter so here is my brand new beehive oil filter up for sale. Price does not include shipping.[ATTACH] [ATTACH]...
[ATTACH] [ATTACH] [ATTACH] [ATTACH]
1939 Ford Standard, strong running 283 with power pack heads, 3x2 Holley 94 setup, rebuild 39 toploader, rebuild front suspension with dropped...
all carbs are gone
I have 3 new Stromberg 97 carbs that have just seen some dyno time and were sitting on the shelf since then. Perfectly clean from the inside as...
price drop: 280$ per piece, 3 for 750$
I have 4 professionally reconditioned Stromberg97 carbs, they are the nicest I have ever seen. no play in the throttle shafts. They look like...
I have a nice Offenhauser 3x2 intake for sale. Fits on 1938-48 Flatheads. 400$ OBO [ATTACH] [ATTACH] [ATTACH] Cast date is 9/22/88, all threads...
My club brother Joe is looking for hints to figure out more history about his 1931 Ford Model A roadster on 32 chassis. The car was bought in...
still available...
NAPA 18562 (SKF seal) does the trick
I have a good set of front backing plates hence I converted my 39 to disc brakes. shipping [ATTACH] [ATTACH] [ATTACH] [ATTACH] is 22$
SoCal GT2 stainless steel adjustable dead perch set hot rod Ford Model A 1932. I bought them for my roadster project but I went a different way....
Still available, shipping is 2x USPS flat rate box about 50$
[ATTACH] [ATTACH] I switched to 40' wheels on my 1939, so here is a good set of nice wide 5 rims with tires. The tires are only good for a roller....
Removed them from my 1939 Ford because I decided to go with 40' wheels. Seem to have a lot of meat left, one is 12.022" the other one 12.024 in...
Separate names with a comma.
The Jalopy Journal
