The Jalopy Journal
Thanks guys for the help I have found that rockauto.com Do all the parts I need and are happy to post them to me in the UK Sent from my E2105...
Thanks fabber mcgee And to anybody else who is offended by my non traditional post I apologise for asking for a point in the right direction...
Good morning I tried to find brake parts for my metros I have a 58 and 59 but to no avail Does anyone know where I can get them Thanks Sent...
I'll have to drag my computer out As can't seem to sign up via my phone See you there Sent from my E2105 using The H.A.M.B. mobile app
Hi again I now have another problem with my 47 desoto fluid drive In high range I have to let off the gas and coast for about 10 secs before it...
Great I'll be getting the drill out this week [emoji2] Sent from my E2105 using The H.A.M.B. mobile app
Nielsk: I'm presuming you drill the hole on the edge of the drum This way seems to be the easiest solution Sent from my E2105 using The...
I can get a pedal within a couple of pumps of the pedal Sent from my E2105 using The H.A.M.B. mobile app
Helpful has got to be better than stabing in the dark! Or pumping the brakes evertime you need to stop Thanks 31 dodger I'll give it a go as soon...
Hi folks I'm having trouble getting my brakes set up on my 47desoto I do not have access to the special tool Being as I'm In England even the...
Great thanks yes it is a half ton truck Sent from my E2105 using The H.A.M.B. mobile app
Hi guys Can Anyone tell me if the front brake drums off a 48 dodge pilot house foot a 1947 pick up Thanks
Thanks for all the replys So far we have one hub off And two bust pullers :-o Sent from my E2105 using The H.A.M.B. mobile app
Hi I am having a real nightmare with the rear drums on my 47 desoto A little while ago i pulled the drums off took all the brake parts off to...
Oh it's was definitely cut up You can still see the cutting wheel marks! I'm going to machine the ports out a bit so I can fit an eldebrock 750...
Thanks for the replies So I can use this just have to block the ports on the engine But being as I'm in miserable England and not the sunny...
Hi does anybody know why you would chop the 2 middle pipes off of an inlet manifold. [IMG][IMG] It's from a 64 cadillac 429 Sent from my E2105...
Hi guys doors Any body know which gearbox is fitted to a 54 international harvester metro van I have a green diamond engine and gearbox in my...
Hi I have just imported a 40 chevy pick up but it is missing the vin plate The truck looks to be titled on the engine number is there anywhere...
Hi Rusty yes I did check around locally but no one has them. It will work out cheaper to get them relined than import some new ones as they are...
Thanks for the information. I have forwarded it to the brake people hopefully I'll have brakes next week :)
Does any body know the thickness that the brake linings should be on a 47 Desoto custom Also do the linings cover the whole shoe when i took mine...
Hi I just brought a 1940 chevy c/k pick up but it is missing the cab seat, bottom half of the grill and front bumper Has any one got any of these...
Yes it comes with the correct bell house for the 4 speed the complete set up came out of a 49 dodge pick up
seems i have found an motor and 4 speed trans for the truck now(fingers crossed) would be nice to find a 3 speed though
should be able to find one of them over here. otherwise it'll be a home build tool like oldrelics
could be a project on the cards
Ok guys thanks some heat will be the next approach and a bigger hammer :)
my mate broke a 3 legged puller all ready. (it was a cheapish one mind) lol and i bolt a chain to three bolts and tried a 10Ib slide hammer on it...
Hi I have a friend 46 ford pick up in the work shop we are a bit stuck at getting the rear drums off Is there a secret we are missing as they...
Separate names with a comma.