The Jalopy Journal
Thanks Algoma56.
Great, thank you..
Hi I am looking for the Sun Distributor Tester article from Hot Rod Deluxe Jan 2011. If someone could scan it and send I would pay for it. I just...
Thanks to everyone that contributed. Well done!! I now have some great ideas and some of my left-overs from remote shifting VW`s to contemplate...
I actually could use 2 and a 3rd for a buddy`s project. If I can lower the flat bar and locate the spherical joint, I believe with the S10 tail...
Great info and thanks to all. That Ford MTC shifter reversed would probably work but to get one. Any ideas where to locate one? 48 chev that...
Any new ideas surface about moving the T5 shifter forward of the S10 position? I did a search here and a lot of great ideas. I am almost ready to...
Would anyone have the WT # for the 81A-7017 main drive gear please. Thanks
Thank you
Someone just emailed me. Speedway and I thought I looked at every page. Part #91017442.
Anyone know where to get a chrome breather tube used on the 49-53 intake manifold? We used to get this stuff thru JC Whitney.
Only thing I don`t like is the 53-56 in a 32 is the lack of left foot clearance between the original column tube and the left kick panel. (This is...
Great feed back. Thank you.
I agree but doesn`t it always seem what your lookin for is never there but just wait till ya don`t need one. I have been looking for a year now....
I can`t seem to locate the correct 32 5 windo package tray but was offered a 1930 tray. Anyone know if they fit. Length and curve on the ends? Thanks
Hi and first of all I do have the instruction manual. Been years since I operated a machine but just picked up this Sun MD-1 and attempting to...
I will give it a whirl. Thanks
So you cut and remove the bottom metal from the original top? This also removes the 2" centering pipe?
Saw a single 97 with what looked to be the 49-53 oil bath style air cleaner but closer inspection showed that the element was a paper filter....
Hotrod33 I am using a 39 trans but did not want to muddy the waters here as both fit the 32 with the correct bearing retainer. I have a chance to...
Looking for a way to leave my 32 trans and original rear mount and NOT chop up the crossmember and convert the drive shaft to an open style. Yes I...
It is hard to accurately measure but the top box looks right and 5 1/2 to 6in. machined edge to machined edge.
It is tough to get s pic now assembled. Again it seems like the snout is too short. I really have a lot of exhaust -manifold to steering box...
Building a traditional hot rod using the early F100 box. The original 32 steering box fits the firewall hole perfectly but the 1955 F100 is not....
I am leaving well enough alone. It runs and drives good. As noted above, the floor boards must be removed to see it and it is not worth the...
Your right ...I`m going to open a hack saw botique for you guys. I"ll sell model A hack saws. Model B saws as well as the model 18 saw (more...
I am new at total stock cars and have been listening to others preach about judging stds. That said it would make a lot more sense to correctly...
Did the search here about getting the numbers correct on a resto. The tranny for my 32 is the only thing that is in error. (replacement) Is it...
I recently purchased a very nice black 32 5 windo all steel car (glass rears) and had many folks admire the great red pinstripe and if I knew...
I am trying to sort out the many problems with a car I purchased and am having trouble with the back glass when rolling down.. The glass will...
Separate names with a comma.