The Jalopy Journal
That helps any sedan pics
I have a 29 ford sedan gunna be channeled was interested in seeing pics of how you guys made sub floor and how you connected it to the body
Thanks
Need to know how wide a 32 grill shell is when mounted to rad (at the bottom)
I'm running a triangulated 4 link and either coil overs or air bags I ended up buikding a nice tube. K member for extra strength
Anyone else pros cons?
I'm building a model a sedan on a custom 2x4. 1/8 frame motor is in I'm building a crossmember now I wanted to build one like the guys run in 32...
I have caddy caps on crown Vic wheels no problem but they didn't fit on 70c10 wheels
Awsome
Yes the car has a 2x6 set up manifold is real low in motor any side shafts hit the valve covers but yours looks real clean and small
Just ordered a 7/8 bar insted of my 1 1/4 bar hope it clears
Lol 4 speed would solve everthing .,... Big block and a 4speed can't go wrong every one loves a bigblock and a 4 speed haha
Geometry as is how open throttle is when kicks down ?
On my sbc manifold I have 6 2 barrel carbs and am having a hard time finding room for my kickdown cable..... Was thinking if I came thru firewall...
It's weld in bungs from speedway and Seam less tube that slides over it
It's 4 inch drop axle and I still have to notch the frame for the spring
117harv so your steering goes thru your wishbones now ?
Where would I get them from ?? Speedway dosent sell longer ones and I googled it and I saw honest Charlie's had a superbell 5 inch drop but shows...
Was thinking of notching the wishbones and plating it with 3/16 to strengthen it back up
Ok I have a speedway drop axle speedway wish bones with spring behind a 32 crossmember dropped and trying to run vega box the problem I bolted up...
So I got my triangulated 4 link In today it's all square and happy I know the lower bars will fine tune the pinion angle what do the top bars...
I bought the universal poly mount kit and I'm mounting mine the same way a newer car or truck would be mounted on trying for a smooth ride lol...
[ATTACH] That sounds about right since I have 4 inches of spacers on there Posted using the Full Custom H.A.M.B. App!
Nissan maurno rears and jeep liberty fronts Posted using the Full Custom H.A.M.B. App!
These tires measure 30 in back and 27 in front they are about 1/8 inch shorter than tires from cooker they have 18x5x30 and 16x4x27 equivalent...
Yes frame is my work measure 1000 times cut once lol and ask a lot of questions .... I have a crown Vic rear at my job out of a cop car I'm going...
Thin tall tires ..... Is the crown Vic rears center pumpkin or offset? Posted using the Full Custom H.A.M.B. App!
Picture of tire has 1 inch spacer Posted using the Full Custom H.A.M.B. App!
Got a disk brake rear from a 98 explorer Eddie bower one axle tube is longer than the other and the pumpkin is off set dose it matter and I need 2...
I've heard to set crossmember at 7deg back what happens if it is 10 or 12 or 15 deg back or even 3* just wondering (4inch drop axle wishbones)...
Separate names with a comma.