The Jalopy Journal
Those spindles and pins will fit the 33-36 axle just fine
Geeze, I thought my computer was gonna over heat and blow a gasket waiting for the pics to show up, which they never did. We are not trying to...
Cool project, good luck with it. Will this be easy to license in France? How about those weird vicegrips you have, French?
Years ago I had a 63 Ford 1 ton with that same bolt pattern . To get normal wheels I put a chev dually rear end in for 8 bolt wheels, and a...
I had a Canadian frame once. Yeah, started with a C, no stars, bigger font, and less numbers. Back then I did find some info online about it,...
Wood gas, or gasifiers are still a going thing. search it on youtube theres quite a bit of experiments going on
RIP Big O. Always enjoyed his posts
I used to get the "used" gas from a boat repair place here. Their insurance co. required the tanks to be empty if inside the building. It was a...
Not to argue with Glenn, he knows flatheads well, but I would think the bolt pattern is the same, with the only difference being the loop thing...
Ok, who invited the Nash guy?
I don't buy anything from amazon. He does not have good intentions for us peasants. support small business
Also, small forklifts are a wonderful thing to have, however, the shop needs to be clean enough to drive around! I have a problem with that, you...
WoW ! sorry to hear this news. hoping for a full recovery.
It's called a 3 dip pan. Some time in the early 20's Henry made the 4 dip pan so you could have easier access to the rear rod bearing.
What did they do for an oil pan and clutch/bell housing?
Member @Mart from across the pond has a video of how to fix the thrust washer surfaces.
You got a double detent shift tower for free is the best part of the deal!
I have an old Miller Dialarc HF. Big machine..cheap. I'm not very good, old eyes, cheap helmet, but for patching sheet metal its the way to go....
Congrats on the clean work table Bob, I know all to well what an accomplishment that can be!
I've never done it, but the A guys will cook them on a barbecue to free them up. Then, one guy made a wrench similar to a band wrench for oil...
Cover on the rear end of the camshaft loose?
Every rear end I've had have had the drive shaft extend beyond the bell by about 1/16 to 1/8". The splines will end up flush with the edge of...
Sad news indeed. I have one of his dizzy's on my 34 coupe, ran perfect ever since it was put on. He will be missed by many. RIP Bubba
Cool that you are doing rivots on the bed pockets. Who gets the dumb end, the backer, you or gas pumper?
You guys should all be using your time tinkering on the fleet, or better yet clean the shop. But if you want to kill time here is a video of the...
Ha! tricked ya didn't I[ATTACH]
If you got a good deal on it, then splurge for a proper die on ebay. Some are cheap
As stated by @alchemy the block is essentially the same size as a 59 motor, but the 3 bolt dizzy is a little longer. Switching to the crab dizzy...
Should be a thrust washer on each end I would think.
I've had a couple of those auxiliaries, (never installed). They are direct, and under drive. not much use unless you are a heavy hauler.
Separate names with a comma.