The Jalopy Journal
Love it! Awesome.
[ATTACH]
Thanks for the information; I appreciate that. I have to admit I never explored that forum.
All engines are motors. But it doesn't work the other way. Engine by definition, means thermal energy is turned into mechanical work. I usually...
Hi, this might be sort of a loosely conceived theme here, but I'm interested in folks' 3/4 ton and 1 ton (or larger) trucks. Nothing against the...
Ok, getting a consensus on 'no aluminum flywheel'. Maybe I should reconsider then...thanks for all the input. I appreciate it.
That's definitely crossed my mind. But I was thinking it would be worth a try. Car is about 3,350 lbs/3spd/3.56 gears. Will be running a Mallory...
Yes, street.
Hi, I am looking to hop up the 223 six in my '58 Custom 300 pretty soon. Part of the package is using an aluminum Y Block flywheel. I understand...
For sale is a 1957-1960 Ford F-100 rolling chassis. Lowered about 4" front and rear. Drop axle in the front. Notch and flip in the back. Chassis...
Last time I heard about kingpins on a 1953 Ford Mainline and a cracked flywheel in a 1966 Thunderbird... But what annoys me is negative comments...
Oil bath air cleaner from a '55 or '56 Plymouth Hy-Fire V8, two bbl. Pretty nice shape. $100 plus shipping. Thanks
Set of 4 Corvair Spyder hubcaps. Two are great, two have dings. $100 plus shipping. Thanks
It's in great shape. Just the retainer, bolts and washers. $30 plus shipping. Thanks
Set of 4 Keystone Klassics wheels with vintage Lee GS 300 tires. Very low mile tires. Rims are in beautiful condition. Four bolt unilug pattern....
This is a Dana 60 rear axle housing from a 1960 Ford F250. It is rusty, but it is not very pitted--just needs a good cleaning. It is not damaged...
This is a Ford Y-block crankshaft that will fit a 272 or 292 motor. It has never been turned. Needs cleaning and probably needs to be turned...
This is a 1957 312 Ford Y-block. It is a bare block with ECZ main caps. Threw a rod through the #5 cylinder, so needs a sleeve. But this block has...
Carburetor is in good shape. Linkages are free. Needs to be rebuilt. Manifold has no cracks, no rust, and is ready to be mounted. From a 1957...
This is a set of Ford Y-block Thunderbird Special valve covers. They are in great shape. They can be used for any Y-block. [IMG]
Set of Ford Y-block heads from 1961 truck. Cleaned, pressure tested; no cracks. Bare heads. Have slight surface rust, but overall in very good...
Set of small letter Dearborn casting ECZ G heads for Ford Y Block. Not sure if they have been milled but they have fresh valves, springs and...
This one here's got much bondo. Probably best for parts. Had the starter rebuilt, replaced the points and condensor, and got the engine to run off...
Small letter casting. Clean. Will be sold as a set of bare heads. Will be keeping valves, springs, etc. Can email more pictures...looking to get $300
$50
$75
$100
Really needs to go. $150 or trade for Y Block and FE parts, vintage Danelectro...any offer will be considered...
Separate names with a comma.
The Jalopy Journal
