The Jalopy Journal
Anyone know who purchased the Hirohata Merc on Mecum?
I've got a chevy crate motor (3 years old) and an aluminum radiator. Any recommendations on the brand and type of antifreeze to use?
Believe me, I would be the first to put a shroud on if I could. The engine sits way forward on this car, the current mechanical fan sits about 1/2...
I was able to get a good look at the fuse box and there is a connection point for a fan, however it calls for a 20 amp fuse. Can I use that...
I have an old Ron Francis wiring kit (one of his first generation kits) all the wires coming from the fuse box are listed. One is listed as...
Can I use a wire coming from the fuse box to "tap into" or do I have to find a empty fuse connection. Also, the way I understand your reply, I...
I probably won't know if it works unless I try it.
Some improvement, 180 degrees on highway, horsepower, probably around 250, new aluminum radiator, sits almost inside the grille shell, good air...
Just installed a new crate motor (stock 350 Chevy) and new aluminum rad. Runs fine at highway speeds but starts to get warm in slow traffic. Don't...
As stated the fan is small (10 in.), it's 12 volts, and draws only 5.4 amps (according to the box). The toggle switch says 20 amps. Does that give...
I am installing a small (10 in) pusher fan. My problem is I am not 100% sure how to wire it. I want to have a simple toggle switch to turn it on...
I've been told that I should try a radiator restrictor to slow the water flow in the radiator. Does anyone know if this will work and if so, does...
I just had a '76 sbc 350 removed from my '36 Ford. The old engine was bone stock, but it ran great for almost 35 years. I flattened a lobe on the...
How much should this drop the temperature, or about how much?
How much of a temperature drop can I expect by advancing the timing on a new chevy crate engine. It's currently running 220 and rises as I get...
Just a stock 350 chevy from Jegs.
Just put in a new 350 crate motor. Any thoughts on what brand of oil to use and what weight?
Try automotive touchup.com
Installing a Chevy crate engine in my '36 Ford, the old one had a 2 barrel carb. I am going to upgrade to a 4 barrel. Any suggestions, Holley or...
Separate names with a comma.
The Jalopy Journal