The Jalopy Journal
I tried to save a buck and the rods look like plastic. They are also not the typical round with flat edge shape.
All it has to do is look cool!
Fellas, I need a little help…. I tried to save a few bucks and bought carbs off of EBay. I didn’t realize the carbs had the “ball sockets” type...
Can someone help me identify this carb? I think it’s a Holly 97? It has a “Ford” and “1-1/16”” marked on it. I don’t want to order the wrong kits....
I installed a 1953ish F1 steering in my 1932. My problem is I have the “ball” type connection on my steering arm and a ball joint at the front...
I have it jammed in a 1932 3 window. I am in San Antonio TX
I never even thought of that, thank you.
Gents- I want to install a T5 (world class) on my 239 Y-block. Will the current 3 speed clutch, pressure plate and release bearing worth with a T5...
Got it! Thank you guy's for the advice, I appreciate it.
[ATTACH] I was looking for something more like this one that will fit the 239 Y-block
Fellas - I am shoving a 239 Y-Block (1953 F-100 I was told) into my 1932 3 window and need a little more room for the oil filter due to the F100...
What is the length of the y block from the fan to the bell housing? I think my blower snout is about 7-8” from the front of the block. Without it,...
Thank you for all of the advice fella’s!
Can any tell me how deep a Y-block truck pan is? I currently have a small block Chevy and lowered my car and the oil pan is far too close to the...
How did you extend the shaft through the frame? I need to extend mine due to the boxed frame as well as the hair pins. Do they make an extension?...
Thank you very much fellas! All great information and I’m going with the 1950 steering. Based on that last picture I am worried how this will...
I have a 1932 3 window and desperately want to get rid of the GM steering column. I was looking for a 53-56 F100 set up but haven’t had a lot of...
Thank you fellas.
I have a steel 32 3 window that someone back in the day filled the cowl. United Pacific sells a weld in vent assembly for a 1932 closed car but...
Bump
1932 Henry steel body Glass fenders 3” chop 1970 Corvette rear Mustang II front 1969 Camaro 350 cu in 671 blower Turbo 400 transmission No...
1969 Camaro trade?[ATTACH][ATTACH][ATTACH] [ATTACH] [ATTACH][ATTACH]
Let me set the stage, I am not a mechanic just a guy with a cool car but I have a 1932 Ford with a 1969 SBC and a 671 blower. The car started a...
$52,500
Might trade for a 50’s - 60’s Corvette
Btt
Sorry for the lack of info. It was mounted to a steel member under the dash with a thick white glue (I assume to keep it from grounding).
Thank you for all of the information. I don’t have points in the car it was swapped over to a Mallory Unilite. Does that make a difference?
I need some advice. I have a 1932 Ford running a 350 with a 671 blower. I was working on the car and bumped a “power transistor “ on my firewall...
Separate names with a comma.