The Jalopy Journal
I acquired these Pontiac Valve Covers and not exactly sure what they fit. There is a part number molded on the inside. 25534426. I'm asking...
SOLD - This starter comes off a 1957 Hemi 392. It is 12v. The teeth look great. Only flaw I see is the missing bold on the solenoid bracket as...
SOLD -- This is a Weiand High-Rise dual four barrel intake manifold for the 331, 354, 392 Chrysler Hemi. Single plane design with a 2000-6800 rpm...
Early Hemi 392 Mohawk starter adapter plate for the 1957 Desoto, Dodge, or Chrystler. Casting # 1736183. It is in good shape and has been media...
These Nicson Marine Exhaust Manifolds are for a 392, 354, or 331 Hemi. Yes they are not car parts but for a Hot Rod Boat with a HEMI!!. Cast...
[ATTACH] [ATTACH] This Timing Cover / Engine mount fits the early 392, 354, or 331 Hemi. Primarily for marine applications but I have seen them...
I don't have the front header. I assume that was a wood piece. All my wood is gone. If I match the rear body panel, then it is about a 3/4" rise....
I'm replacing the wood roof ribs with metal and have none to copy. I can copy the rear roof line but not sure if that is the correct arc. Can...
4 1/8" from the rim mounting surface to the sidewall widest section That tire is on a 6 " wide rim - within spec
wheels have 2.375" back spacing Tires are the Firestone dirt tracker 890-16 The body is 54.5" and tire inside sidewall to inside sidewall is...
Sorry my mistake The width is 61 1/2"
Thanks for all the info. I'm not sure which model I have. Maybe the following will help ID it; Width from outer axle flange to outer axle flange =...
I've acquired a jag IRS and am fitting it to a 29 A tudor. Due to the rim offset and tire size, I need to widen it by at least 2.5". I think my...
Separate names with a comma.