The Jalopy Journal
I'm looking to replace a 2V carb on a ford 302 with a tag that reads D3MF-EA with a suitable Holley unit. I can't seem to find the CFM rating for...
This unit is stamped C4AE-6375-B I have counted the teeth multiple times and it is in fact a 160 tooth flexplate. I cannot find a replacement for...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Restorer's/Hot Rodder's dream. Fantastic...
Anyone have a good auto parts store part number for the bypass tube in the intake manifold to the water pump? The Ford PN doesn't cross over....
Its on a disc brake conversion set up. It's a Ford type MC with a square top, small chamber forward with 1/2" and 3/8" ports. It's physically the...
So this is the 4th carburetor in a row that we've had this problem with. The accelerator pump not functioning properly. In this case, the piston...
Looking for, but haven't found as of yet, a 14" steering wheel that smacks of a 50's ford pick up style wheel and will bolt directly onto a later...
Its a tired crate 350 with HEI and a THM350 with a 10 bolt out of an 80's Camaro. We put a new Edelbrock carburetor with electric choke on it and...
Is it really that hard to find one of these things anymore? None of my local vendors have it. Truck and car shop doesn't have it. I don't like...
Helping a friend out. He's got a 64 C10 with a 230 and a M22 4 speed with 3.73 rear gears. He wants to put a 5 speed in it. What 5 speed trans...
I have a 49 merc here and the set screws for the door lock cylinders are missing. Anyone have a spec on a correct screw for this application....
Got a car here with a 350 and a saginaw 3 speed. When we got the car the pedal was really hard and had a late release. Thought maybe it was just a...
Anyone have a good part number? Anything that will fit. The unit is inoperative. Just for decoration. thanks.
I bought the repop door lock cylinders from Dennis Carpenter, but I cant seem to find any kind of retainer out there anywhere and I wouldn't know...
Just trying to get an idea where the speedo cable passes thru the firewall or toe board for a sedan in stock configuration so I can go snooping...
Got a mystery truck here. No idea what the rear end is out of. Its a GM 10 bolt, maybe an 8.5, it has 11" drums with 2" shoes and 4.75" bolt...
I have a 55 with a reproduction steering column and the steering column turn signal housing won't stay locked in place. It feels like the shift...
I am looking at a 32 chevy low boy style coupe. Has a speedway type 4" dropped I beam front axle and a new corvair steering box. The steering just...
I have a car on boxed Deuce rails here and it looks like if I just try and mount the bracket straight to the frame, the pedal travel will be...
I have a little '31 chevy hot rod here that needs a little updating. Its got coil spring suspension in it out of a fox body mustang, but it sits...
I have had multiple people come thru looking for power steering conversions for their 65 F100. It looks like nobody makes a kit for this YMM. A...
Anyone have a picture of the axle flange with the drumm off or an exploded diagram? trying to figure out what I gotta do to replace wheel studs.....
Anyone have a good part number for a set of U bolts for lowering blocks for a stock 1949 Mercury rear end? I think they are 2 3/8"... Any help?...
Sorry, but I just need a measurement from the 4" opening to the number 7 or 8 exhaust tube. Thanks in advance
Good morning all. Trying to figure out the heater hose routing for this '49 Merc. It has the 8BA flatty in it. There are 4 ports on the firewall....
Does the '55 Chevy car with an automatic have a spring in the lever or just the spring in the tube? I'm putting a fresh column in and the kit...
This one is driving me nuts. Gas gauge was working, now its not. Sits just above empty. I've tested the gauge multiple times. I am confident it...
Just looking for recommendations on a kit for an aftermarket boxed '32 frame. On paper they all pretty much look the same, but I know there are...
I have a 65 f100 300 CID with the SCV carburetor. The throttle cable was all mangled. Got a new inner cable but i can't seem to find a cable end...
I have a new distributor, but I don't have the old one to scavenge the compression fitting for the vacuum advance can. Anyone know where that...
Separate names with a comma.