The Jalopy Journal
make sure your secondary butterflies are closed as this will bring your idle up and not allow idle circuit to operate
what is the position of the bleeders r they high or low on the calipers i've seen people mount them on the wrong side before & have the same problem
It is a 30-31. U can tell by the raised areas where the radiator mounts. What part of NW Ind. r u in
My daughter has one also but hasn't been able to work on it yet. some day maybe
what part of ind. you live in? I know where theres some parts
a friend had a 26 which looked very similar to this one. the windshield was a one piece tall unit that pivoted on the stations don't know if it...
You say you are using Co2? you should be using 75 % argon 25 % Co2. also I have found the 110 v units to be harder to use than 220 v. I personally...
I use Brattons they always fit well and fast shipping. you will be pleased with what you get.
go back & get the proportioning valve off the s10 & it should work fine
Very well said
you guys are complicating a simple uncomplicated issue. Indiana does not have screwed up laws like some other states regarding customized...
done it numerous times with no problems just costs 10 dollar delinquent fee:)
if your grampa didn't sign his name on it just sign your name to it & take it in, that is if its an Indiana title. if out of state you better try...
definitely not ford
try putting 1/2 cup of rislone in each cylinder & let it soak for a week, then spin the engine over with plugs out then replace plugs, start it &...
I believe tie rod ends on all ends would be a better choice as there will be rotational stress on the heims during movement of the rear axle as...
Has anyone used this spring ? I need to know how much I will get with this spring on a full fendered 30 sedan. I'm using a 4" dropped axel &...
gee, now i'm afraid to ask anything about my suspension issues on my project
did you remove the frame welting on both sides
they now make a vega power box that should fit nicely. look for the ad in streetrodder I believe its about $300.00 not bad
sounds to me like the rear shoes are out of adjustment have someone step on the pedal and release to seat the shoes as you adjust them up been...
indented firewall is late 31
As the pot calls the kettle black:D
are the butterflies closed on the other carbs? since they don't have idle circuits there cannot be any air flow thru them that would lean out your...
I had one do that & it was a short in the harness at the core support causing the breaker to kick out on the switch
make sure you have a pcv for a v8 cuz one for a 6 or 4 cyl has too large of pintle in it not enough flow
sounds like a plugged idle circuit you wont see any fuel coming from the venture at idle because idle circuit is below throttle plate
with the frame level it has a 3 deg angle
what do u think theres 2 ft. of suspension travel or what?
there is only supposed to be one rubber washer at the front of the cowl. looks as if u need to lower back of body and adjust shims under rear of...
Separate names with a comma.