The Jalopy Journal
That I couldn’t tell you. The time I seen the car it had the 31 shell no hood.
Do you mean the Mystery Coupe? I remember that car. There was a Hot Rod Magazine article on it on line. [ATTACH]
K13 is completely correct. Just to add a couple of things. Invest in some microfiber towels. The Rag Company or Autofiber make excellent towels....
I remember being in high school and wanted to fill in some trim holes on my car. I didn’t know how to weld and there was a ton of them. So I went...
I happened to see this car today at the GNRS. It is a super nice car. It was displayed with mirrors to show the underneath. It just a nice as the...
Nothing on the car today. At Peterson museum today.
Got the steering finished. Had to use two double joints to get the clearance around the headers and the correct angle to get to the shaft coming...
Yes, I agree about the phasing of the joints. I do think that a support is required for it as there will be 4 joints in play. I already have the...
Working on steering for my model A. Steering angle and header size are making it more difficult than I thought. Am thinking of running two double...
Get well soon.
I’ll be there. Always found some part I needed when I went.
RIP Roland. I got his autograph when I was a kid at the March Meet in Bakersfield.
I would remove the electric fan and just run the mechanical one. But I would definitely use a shroud. That will allow the fan to pull heat from...
Readjusted the rockers after break in. Adjusted timing and idle. Did drive the car out of the garage for the first time. Only about 15 feet. Would...
Check out leash electronics. He sells a 4 or 8 relay board. Each relay is rated at 70 amps. You add appropriate rated fuses to it. For example,...
RIP Mike
383 sbc with 3” Borla Pro XS.
That’s a real smart way to setup the steering. The problem I have is the steering column I have has is long. It’s one of the tilt columns that...
I’m using a SoCal frame with their “K” member. Working around that has been a little frustrating. Getting the clutch linkage and clutch master to...
I went with a model a frame for mine. Was always planning on running the fenders. It is cramped for room. But with some tinkering and sometimes...
Installed the driveline. I ordered it from Strange Engineering. First time I ever ordered one. Fit was perfect. [ATTACH]
Got the tach and tach cup installed and wired up. Started redoing the exhaust. Didn’t like how the first system was going. Was able to get from...
I recommend the Deutsch connectors as well. Just make sure to run the appropriate plug for the gauge wire. I bought one of the JReady kits on...
Went to breakfast with the wife and this was parked out front. [ATTACH]
I have a Walker in my 31’with a sbc with a/c. No problems at all with over heating. Build quality is nice. I wouldn’t hesitate to get one from...
I picked up an alternator from Mechman in Tennessee. It’s a standard 12si style, came with a card that said it made 180 amps.
I’m using an American Autowire highway kit.
I think I remember reading years ago about a coffee maker that was in car and mounted to the dash. I can’t remember which manufacturer made it.
Yes it is. Al is still running it. Though I heard his grandson is working there too.
This is a small shot of a local speed shop by me.[ATTACH]
Separate names with a comma.