The Jalopy Journal
My impatience got the better of me and made some quick progress. Very happy to have the first drive! [MEDIA]
haha I was waiting to be called out, but more offensive I thought was the wool socks with sandals.
Thanks for all the replies, y'all at least gave me blind confidence to run the engine longer after it starts smoking. I know the recommendation...
Having just got the truck running after 10 years, now once it gets warmed up there is smoke (can't tell color, but doesn't smell sweet or like...
Thanks Leevon I ended up going this same route as well and with the new fuel pump installed the truck runs smooth (no choking on lack of not...
Thanks I did find you could reassemble it with the ring into the groove with or without the bellow threaded through the ring. Since I had time...
So from underneath like in pic 1 or you saying pic 3?
Guess I should start a new thread on rebuilding pumps?
So anyone know how to rebuild a bellows fuel pump? With mine melting apart and no good detailed parts diagram to go by, my first attempt at...
I decided to disassemble the Walbro just to take a look and found the bellow had deteriorated into black tar and was clogging up the bowl. So to...
Figured out it's a Edelbrock 1404 500cfm carb and from what I have found like 4-6psi but shouldn't exceed 6.5psi on the fuel pump. If I have...
How important is it to stick to the GPH and PSI specs of the old pump? As I am seeing them range quite a bit.
Getting the truck closer to running, but needing a replacement electric External fuel pump. The one currently on it is a Walbro 12v2401 and now...
Don't buy the cheap amazon switch i last linked too, tried two of them neither of them worked.
I ended up going with the universatl ignition / starter switch now that it seems so easy to wire up the ACC needs; way cheaper than the Starter...
Great to know info! I actually have a full wiring kit but for now electrical is low on my list as I just recently got it to turn over [MEDIA]...
Instead of going the full wiring harness at this point, I was more trying to get something other than touching wires together to start. Good...
Thanks, I think y'all are warmer than we are somehow right now :) First tech question over in Styled, about wiring up an ignition solution
Most the wiring had been yanked out of my 56 Chevy Pickup by the PO and since I have got the truck back to starting via hot wiring I thought it...
I am going to go ahead and guess the styled forums
Just picked up my first "real" project having owned 16 previous set of wheels, this is the first one I purchased knowing I would have to tow it...
Separate names with a comma.