The Jalopy Journal
Late reply I know, but wasn't going go use it in a independent front end, was thinking about one for my I-beam front roadster pick up.
Here's a couple I've got, there are more, and there will be more too.[ATTACH][ATTACH][ATTACH][ATTACH]
Is that a Y block head on that thing ?
Thought someone would have used one
Has anyone used one of the speedway motors steering rack. Don't know if you get a left hand drive version in the states but we can get a rack...
On the way to CHOPPED 2013, awsome show[ATTACH] If your not living on the edge your taking up to much space
Yep, 4bt with a allison would be a sweet combo, bit more fuel, bit more boost and you'd clean up most small blocks without a problem, and be a bit...
^^ spot on. ^^
Do you have a roof on your 29?
I like your style..
Got any more pics and info on that home made broach press?
That pretty much the same body I have, but mine is a 29 Chrysler, same grille. I'm thinking if you can keep the back seats low, wind wings on the...
How bad with a roof
Why not the middle back seat?
Hmm, that's pretty much how I imagined it would be.
What's it like sitting in the back of a tourer hotrod on a trip, how bad/good is the wind? Does a roof help much? What else can be done to make it...
I welded a new socket into mine and made a new stick, but some later model sumps including windsor's, had a riveted section for the dipstick in...
I would be leaning towards the pop off valve type, I don't think even in a back fire scenario you would make that much psi?
The reason I ask is because I have a mate with a top alcohol funny car, at one stage he had a fuel pump problem resulting in a lean backfire and...
I found an old tram conductors leather pouch at a swap for $5, works a treat. The other idea I had was some sort of saddle bags
Interesting piece, In 1957 Scott designed the Scott injectors and Scott and his business parter, Ron Hess made the patterns and did 90% of the...
Nice find, but I have one question, if it's a ford chassis, ford motor, gearbox and diff and a chev body, what is it? Or do you just call it a hotrod?
^^ that is true, also one piece seal can be changed without disassembling the motor? If crank is marked from over tightening speedy sleeve may work
Could also be gearbox?
Agree with that 100%.
And another one, home made 1" rhs bender, made out of left over plate and a old trailer wheel bearing hub and...
[ATTACH][ATTACH] Cheap easy set of dividers, these ones are made out of 6mm stainless, hard to find a set that go big and are still useable for...
Really traditional would be great, and apart from the fact that I've never seen a borgwarner 3 speed overdrive before, i live a long way from any...
Thanks guys, was probably leaning towards a t5 conversion. There aren't any conversion kits done in Australia that I know of, and there are quite...
Take two, seams I did the last topic in the wrong place, and didn't get to read the replies. What I want to know is what some of you guys out...
Separate names with a comma.