The Jalopy Journal
Driving it off the original cam will spin it backwards
I can't remember which, but it is possible to fit an Anglia or prefect distributor to an a engine, might be a bit more readily available in the...
We got the burtz fully dissembled and we discovered the culprit, when we built the engine we used a cast crank gear amd that failed taking out the...
Yes the block did have the oil hole, not sure if it's a billet or cast gear
Between yass and Gundagai
Stipe pump and relief, engine had consistent 40psi, oil pressure was still at 40psi when the engine coughed but after that had zero, turning the...
That would be interesting to see but packaging exhaust on a right hand drive model a is difficult, will update after more disassembly [ATTACH]
Pic of the gear, wouldn't attach to the previous post [ATTACH]
Our trip to Gulgong for the model a 95th birthday was a blast we travelled 537miles at 70 mph most of the way but in my mums burtz powered model a...
7.00x16 5.00x16 Stahl sport radials
Today was a success ended jetting both carbs up to stock jets and made it much happier, adjusted brakes (repro Lincoln brakes), cleaned the plugs,...
It sits way better than it did 2 years ago[ATTACH]
Mums burtz powered sport coupe went for its first test drive with dad @phill today, it went fairly well but still needs a bit of tuning, the...
I spent the last couple of weeks working with my dad to try and finish mums burtz powered sport coupe ready for the queenscliff rod run (a pretty...
Had my town sedan out for 10 days over my Christmas break, I've recently changed from a Stromberg 97 to a late larger 94 from a 272 yblock, I'm...
Here's a few photos of my a and my mums burtz bolted to a standard engine stand its not too hard to do[ATTACH][ATTACH][ATTACH][ATTACH][ATTACH]
I still have the original hand and foot throttle in my town sedan with a burns intake and a Stromberg, I don't know if its as easy to set-up on a...
My 4 into 1 header i made with my dad follows the firing order [IMG][IMG] It wasn't practical to make them equal length due to being right hand...
I had the exhaust off to fix a leaky gasket so I fired up my warmed up banger and let it breath through the open header for a little bit [MEDIA]
Get my email off dad and i can post it for you if you want
Easiest way to get a video onto a forum is to upload it to YouTube and then link it across
Railcarmover is correct
Checking in its the start of summer here in Australia, a few weeks ago one of dads friends stopped by on the way home from a rod run, his coupe...
I'm starting to think I may have to, or make an adjustable restrictor for one of the radiator hoses we do sometimes see temps up to °42c (°108f)...
I've had my a about nearly half a dozen times today it was °24c spring time in aus( °75f) and I'm have problems getting my hopped up banger get up...
Those are really cool, must have been a fair amount of work
I have a fuel pump for it, just have to find time to fit it
I had my sedan out yesterday playing with timing and got it pretty good, now I think it needs a fuel pump gravity doesn't seem to be able to keep...
I do have a laycock overdrive for it, but its probably going to be a while before that makes its way in Thanks, my sedan used to be my...
Hi all, long time lurker first time poster to the banger threads, I thought I'd throw up some photos and little bit of footage of my warmed up...
Separate names with a comma.
The Jalopy Journal
