The Jalopy Journal
You are the man. Thank you. On its way!
I have an automatic so no clutch pedal. I seen what it is supposed to look like, didn't know if anyone is producing them. Any leads will help.
Anyone have a suggestion to get a replacement?
Ok. I'll look into it more. Thanks for the help
My spring looks nothing like that. Just a typical extension spring similar to a throttle return spring on a carb. Going to have to further...
Inside the push rod bracket? I have mine hooked there, I'm curious as to where the opposite end hooks to. Only thing I found close was hooking to...
No one? Not even advice?
Does anyone have a pic of where the pedal return spring attaches? I have it on but I'm almost positive it's not in the right spot
It was always power brakes. I'll check and see if there is another hole on the pedal. I don't believe there to be one. The rears are adjusted to...
They are power brakes. Don't believe the prop valve is adjustable. It feels like the fronts are locking up. Haven't driven in a while.
I hooked them up the way it showed.
Yes it is disc drum setup with proportioning valve. It's a dual Mc. Not sure of the name brand. Kit was from mcgaugheys
I did a drum to disc conversion on my 64 impala front end. 327 car, power glide trans. Dual mastercyl,new lines to the front. Problem is when I...
The new covers have breathers on them. Ran a pcv on one.
My stock ones had no breather.
I fixed the chrome one that was leaking oil.
Got it fixed. Was bowed on the bottom. Little sanding on the gasket and bingo. One less problem
I have those on already.
What do the corvair valve cover clips look like? I bought spreaders for the bolts, I need to check it on a flat surface. It may be twisted a bit....
There are breathers on them. Just passenger side leaks, going to mess with it and see if I can bend it in, it leaks in the middle bottom. Got...
I'm not sure how it ended up in here. They are stock 327 gm covers that came with the car, I'm going to check the leaking one I put on and see if...
Got a set of valve covers that the passenger side just won't seal, damn China. Going through put my og ones back on, put new intake carb and pcv...
picked up a new holley carb this weekend, need new intake, suggestions? stock, not doing cam or any hop ups, yet. just a driver
Sorry for double post
My tires are about 95% so not worried about that. Going to try for next Saturday on alignment.
My driver side rod was a bear to adjust. Passenger spun freely. Got to try and make it go straight
I didn't have any other parts left, but I checked out kits on ebay and they show only one, thinking I just got an extra. Going to try to rebleed...
Tried the mity vac bleeding pump, still have to much pedal travel, going to pick up air powered bleeder Saturday. Still wondering if the push...
Got it closer tonight. Pulls left a bit, but going to get proper front alignment next. Now about the brakes
Separate names with a comma.