The Jalopy Journal
I had thought about that, the switch itself had the original wires so I just finished re wiring and soldering the turn signal switch, and as far...
I would like to keep it 6volt for as long as possible. T
:confused:That's what I thought but the brand new Heavy duty flasher didn't help at all:confused:
1154 is the correct number, I have replaced them all as well as the grounds, brand new blinker, added more resistance and still have had no change. T
OK, checked the grounds, good. Tried adding a bulb inline, no change, put in brand new flasher, no change. It is reading 2.5-3 volts at the bulbs...
^^^ That's a good place to start T
I have 2 early manuals for my '51, both original shop manuals, 1 says long shoe in front, short in back and the other says short in front, long in...
As an ex fire fighter as well as a man who makes a living on boats, this is of the UTMOST importance, there has been a time or two where I have...
welcome from KCMO
my buddy has a 52 fleetline with coil overs as well as leafs, it feels like your sitting on a donkey, I have a 51 with stock leafs and new shocks,...
If a filament breaks, will the light still work? They all four work with running lights as well as "high" beam for the signal, all flash at the...
hmmm I have no idea, I will look into that. Thanks T
I did and it was full until I spilled it all over the grill......... If by blinker fluid your referring to a tasty frosty PBR tallboy
Where?
I have the exact same on my DD and have not had a single "bad" experience other than some small jumps here and there. The only time they seem to...
I put in a brand new flasher and had the same problem:confused: T
No LEDs here, I'm still running the old 6volt system. I've got double filament bulbs and they are all working. Still trying to wrap my head around...
What would cause the blinkers on my car to blink about a thousand times a minute? I have a guide turn signal, 3 prong flasher and all of the...
OK just got back from the car, I will try to paint a better picture. My brake lights had been staying on unless I reached down and pulled the...
Come to think of it, I do have a turn signal that has not worked in a long time, It only had a few wires out of the 7 connected and the other day...
I tried re grounding the tail lights, nuthin for the brakes. The tail lights work with the headlights, the brake light switch had to be shimmed...
That's what I was thinking.. just wasn't too sure. T
Thank you fellas, I have switched it out before, but this time, it's not working properly. It IS a mechanical switch that has nothing to do with...
Hey fellas, Got a question. On a 51 Fleetline does the brake light switch itself need to be grounded or does it ground through the lights? Thanks...
Also welcome from KCMO.
Mine is a constant ongoing project and happens to be the only car I have, therefore I have no choice but to fix it while I drive it, A couple...
I'm in. It's the only car I got, drive it everywhere I need to go. And oh yes it's turning into a beater for sure. T
Separate names with a comma.