The Jalopy Journal
Thanks. that gives me some ideas on how to mount it. i don't have any welding skills so i was looking at using rivits to mount the shroud to the...
I'm replacing the radiator on my 41 ford deluxe with a new aluminum radiator from champion. The original radiator did not have a shroud and...
They would be the only ones making it so i would think they would make some money from it.
Yeah that's what i figured. Re-chroming is probably out of my price range anyway. I was actually looking in to doing a nickle finish on it...
The reason i ask is because the grille on my 41 has a couple of fins cracked and the bottom center is split. I've looked into repairing it and...
It just seemed odd that i have to compress the spring to put the shock in. granted the car is in the air at the moment so there is no weight on...
yes. They are fully extended
anyone?
I'm replacing my front springs and shocks on what i believe is a Mustang II front end. My question is should i have to jack up the lower control...
I used a rebel wiring 9+3 kit. It included everything i needed plus some.
yeah seems about right for the width. i'm not where i can measure them at the moment.
cool thanks. would there be any need or want for these? i've put a new suspension kit on it so i don't have a use for them.
stock out of what? i thought the 41 fords didn't have parallel leafsprings. i know the mounts they where attached to were not factory. they...
These are the leaf springs i pulled off my 41 ford. Was just wondering what they might have came off of. I've never seen wrapped leaf springs...
Yeah i understand the concept of setting up. The problem is taking the measurement at the transmission tail shaft to get the proper angle for the...
Thanks that was the last measurement i needed before i got my spring perches welded to my new rear end. Now i can finish this swap this weekend:D
sorry double posted somehow. not sure where or if i can delete it
Is that 6 down or up? have to say first time i've read of 6 degrees. Most of the post say 3 up on pinion. Some say 3 down due to spring wrap....
So I'm replacing the rear end of my 41 ford deluxe. New diff. and new leaf spring kit. I understand from reading a lot of the pinion angle post....
Alright I have a new torque spec question. Probably a stupid question but i would rather ask and get it right than guess and mess something up....
Yep add me to the list. 41 Ford Deluxe with a 350/350 combo. My wife and I call it Forvy.
I'm interested also. Here is a pic of my 41 ford. I bought it with it's arse in the air. I'm in the process of lowering it down back to a stock...
33 with a 41 Ford Deluxe 4 door.
no you have to be at the front of the car with the hood open to hear it. And some people don't hear it at all. I just tried merging the...
It has been a while since i was last able to work on this problem. But I am still having problems with my battery going dead on me. I know that...
Thanks didn't think to check for the bolts. That's what I'll use. My main concern was to tighten them too much and hit a bump or pothole and the...
Anyone here used the Chassis Engineering Complete rear end mounting kit on a 41-48 Ford car? Here's the link to the kit i bought....
Well I've got a hold of a few friends and I'm gonna have plenty of jackstands to work with so I'll go that route. I'm guessing the best place to...
Its parallel leafsprings which i will be replacing with a chassis engineering rear suspension kit. The previous owner had changed them to...
Separate names with a comma.