The Jalopy Journal
If you have the crank out of the engine and have the balancer and flywheel grab your pistons and rods and get them balanced as a unit. then every...
When you get a trailer like that put your logo or something on the roof, they will not be able to see it from the ground when the steel it
When I first got my blast cabinet I killed the glass in no time , Then I got a new glass and covered it with duct tape in strips, you can tape...
My wife came back after being divorced for twenty two years. Didn't remember why we divorced in the first place so we try'ed it again. After about...
Sounds like a 348 or 409 motor, they have a cut like that
There is a c 80 in the hamb cars for sale half way down on page 2 409 runs good $6500 in Ohio and there is a phone number to call, the motor...
Time sure fly , Life is like a roll of toilet paper the closer you get to the end the faster it goes.
You modified guy's wasted a ton of good old cars ,what's your point
Who said you can only have one set of wheels.
How would you do the inside opening ? Do you know anyone with a 3D printer
nickel plate them, cheaper than chrome and last longer then just polish
If I owned that car I would put It on jack stands under the body and take out every bit of front and rear suspension and start fresh. Just putting...
when you contain something that burns that fast and hard isn't that what you call a bomb ???
Clamp something flat like a 2 x 4 to it and heat lamp the crap out of it.you mite even put something at both ends so it is clamped farther then...
I'am looking at the same problem and don't want to remove clutch and pressure plate. What I'am going to try to do is put one of my clutch...
If your thinking about having a spring made you need someone to send you a GOOD template to copy with the mesurements
There is no rule that say's the fuse box must be mounted on the driver side. I always mount my fuse box and wiring on the passenger side, there is...
Send it to your chrome shop and have them strip it for you that way if your going to re chrome it they don't have to fix your grinder marks
It would make a good parts car through that duck bill nose and the body away and you mite have some good parts. looks like it has a chrome front...
I took a 1960 Oldsmobile flywheel to a machine shop with a Chevy pressure plate that I wanted to use and with a C N C mill he had it done the same...
$50 to go get your oil changed at local shop, new oil, new filter , no mess to clean up or oil to get rid of . Or use 20 year old oil for free and...
I always tell then it's a 1933 ford with a Olds engine and a S 10 transmission and a ford 9 in, and it's green. Then I come home and find in on...
I worked on a NASCAR team back in the 80's and that's all we used , we did put a taller filler cap to increase volume
I put a real light coat of silver header paint first , just enough to cover your engine then put on the chevy orange. It takes less paint to cover...
looks like a great mock up transmission to me
I can't see rebuilding that engine just to sit, that's money you could use to further your project that is all ready started
I use it all the time , I use a heat gun on the tar side to get hot it will stick a lot better than just peeling of the paper , then use the...
I had the same problem, square tires I balanced them 100 times finely fixed the problem, sold them to some kid and bought a set of diamond backs...
When I lone something out like shocks, tie rod ends, headers I only give one for setup the other one I tape a name on so I know who I let use it .
I live in North Carolina and go to the hot rod reunion when ever I can , I will pay your admission ticket and pay to put your car in the grove....
Separate names with a comma.