The Jalopy Journal
Hey, I found an old 3 piece Champion 10com spark plug in the back of a 31 Ford. I'm just curious what it would be from, if anyone has an old book...
Figured I'd update. Holley has no record of this carb number, but it measures out to a 750. It was originally a 4 corner, but someone hacked up...
Yes, shape of bowls as well. The floats are white plastic. Maybe this unit was so bad, Holley won't admit to it.
I've got 1.650" on the throttle body, 172 and 173 plates.
Ok thanks.
Sorry for the delay, out of commission a couple days with the flu. So here's the pix. Angled boosters, same metering blocks 11180 front and rear,...
[ATTACH]
Hey, trying to Id an older Holley 4 barrel. List 80469 (date 2262), I don’t have any older listings. Doesn’t come up in a search. I just want to...
Nice Comet by the way, Joe.
Yeah, so at least it was a fairly easy fix. And common for our V8 powered econoboxes. So if you eyeball it and it looks off, you should be able...
Yep, I was afraid of that. Thanks squirrel. Joe, my axle won’t install, so I can’t bolt up the retainer plate. So I’d say your extra clearance is...
The question is, on a Ford 8” rear, when swapping an open gear to a trac loc does the l/s axle need to be shortened? Swapping an 8” center section...
Thanks for the info.
Thank you.
I'd like to swap an automatic into my '52 L110, using the original 220 straight 6. Before I rip it apart, does anyone know if the bellhousing bolt...
This can be removed now if necessary. I'm still getting hits on it. HeyI've got an older cast aluminum (not billet) Mallory Unilite part...
Hey guys, I need to come up with a pair of replacement sway bar bushings that will fit in a bracket 1 1/2" tall and 1 1/2" wide (compressed). It's...
Anyone on Long Island remember a red 64/65 Chevelle/Malibu called the Red Baron back in the mid to late 70's? I remember it had a black interior,...
I remember those SOHC motors. Friend of mine picked up a Ventura (I think) a few years ago with one. In the late 80's during the IROC Z and 5.0L...
Took a while but Heres an update. I swapped a condenser and the stall went away. Also found mismatched points, one good set of Blue Streak and one...
Thanks guys...and deathrowdave, I'm on both sides of the fence, I build Shelby Cobras mostly. Did a lot of corvettes too. Distrib is stock. Gonna...
Hey guys, a little embarrassed, but I have a situation with an old Ramjet fuelie with a dual point distributor. It's in a straight axle Vette and...
I see the Dockery Ford T-bolt mentioned a few times, but does anyone know if it's still around? Thanks.
Separate names with a comma.