The Jalopy Journal
for example? http://shop.advanceautoparts.com/p/dorman-conduct-tite-14-gauge-fusible-link-wire-carded-85622/5015383-P#
Sounds good. Thx for the input fellas. VTWHead, what is a fusible link? Same thing as an "in-line fuse"?
Any advice or website you guys have for me to begin wiring my 55 ford truck? It's my first time doing any wiring. I have a painless 18 circuit...
Well, ended up not messing with the pedal. Decided to return the floor plate and make my own. Used 1.5" hole saw for brake pedal and 2" hole for...
After looking at the pedal last night, I've decided to return the floor plate to midfifty.com and make my own. I don't think I'll have a problem...
pist-N-broke and unkledaddy, Thats not the bracket I have though. My bracket comes with a new pedal. There's a new shaft for the new pedal to...
[IMG]
my brake arm is 1.5" off centered. I need to move it over somehow to fit in the proper opening on the floor plate. Is it safe to cut the brake...
Sorry Garbz, you'll get it tomorrow. 12 hour shifts at work sux. Well, Here it is. .98 cents 2" abs coupling fitting at lowes. It's even black...
73RR this rod was free. Trying to make it without using too much $$. I thought about rod journal bearings and then maybe filling the gap with...
Need to reduce the inner diameter to 2". it's about 2 1/4 or 2 1/2 now. I know this has been done before. [IMG] [IMG]
Getting some ideas together before I start to tackle my seat brackets. I want to get a steering column mocked up, but I need seats installed first...
http://project33.com/tiresize.cfm
That pic wasn't taken just for the thread :)
I forgot to mention, I just have a rear 9" housing. No axles yet. I like the furniture dolly idea or the tow truck. Thx from the Haynes family...
So the wife and I bought a bigger house cuz the family is growing (preggos) and now I have enough room in the backyard to build my workshop :D...
[IMG] [IMG]
Does anyone have any good resources, (websites, magazine articles, etc...) on the step by step procedure on installing a rear axle? Getting ready...
I'll have to dig up the paperwork on the motor. Bought it from P.O. This truck is gonna be primarily my grocery getter. Although might wanna go...
Aren't my options 2.75, 3.00, 3.25, 3.50, 3.70, 3.90, 4.10, 4.56, and 4.88? sorry I"m new to this...
have a 351w, alum. heads, comp cam, roller rockers. C6 transmission. 17" wheels right now, but wanna go bigger eventually. PUtting a ford 9" in...
Any tips or tricks? I have used the welding spoon for the little holes, and the medium holes i filled with steel rod or bolts and then tacked it...
This is my first post, so excuse me if it's in the wrong section. Has anyone used one of those "ididit" or "Flaming river"" knock off's from...
Separate names with a comma.