The Jalopy Journal
Have a 37 flathead I want to do a compression test on .Will spinning the engine with 12 volts give me a false reading ?? Also what should the...
Darrell's truck is a 36 low cab ,I posted my 34 35 hi cab truck to show the difference between the 2..
Ton of wood in a 34 35 pick up ,lots of dents too.A time when a truck was used as a truck !!! On your way to a good looking truck!!![ATTACH]
Yep , Have 3 Boys that have no interest in my cars at all !! When I die drive by the house it will all be on the front lawn or next to the curb ....
Gas Sure was fun while it lasted
Cashing in ,before people realize there a dime a dozen and way overpriced would be my guess!!!
Gotta watch them flywheels with the little hole in the flywheel and crank line up . Have seen a few with them not ..
So just to follow up ,I took a 1965 flexplate to the machine shop and had the indexing hole opened up from 2.456 to 2.900 and bolted it on the 63...
I Always run a hood. Car here in Ontario won't pass a safety without a hood . Got pulled over by police and he was a rodder. Explained to me that...
Have an st 400 out of 65 riv And a st 300 out of a 64 425 riv , but in Canada and no I don't want to sell the converters ,but would sell the...
nice T engine what transmission are you planning on using ?? I was running a 26 T with a model a crank and rods ,with the original transmission ....
Still the same dimensions 37 -40 ? But your right 37 is a tube axle
Putting together an A frame and wanted to split the wishbone or run hairpins was going to use a 37 axle but it has been suggested the hairpins or...
Dragged some stuff indoors and dug thru some more stuff and now got the what to do headache LOL Split bones ,hairpins, hairpins with bushings...
Just going thru a similar delima now , have clevis and bushings ,but also split bones [ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Here are a few of mine 37 21 stud ,maybe my T 65 401 63 401 in run stand 66 401...
Great looking truck then again I am bias [ATTACH] [ATTACH]
Looking good Meeksie ,the sills.look good ,are you using bear claw or original latches on the doors ??
Anyone have any info on this wheel?? Plastic rim ,finger grip on back of rim ,hexagon lighting holes [ATTACH] [ATTACH] [ATTACH] [ATTACH]
[ATTACH] cold here this week too. Think I need an overdrive for my furnace !!!! Mileage just sucks !!!
33 34 chev truck
The cam was dealt with when the engine was last done ,originally a spring and button
Actually came with shorties and tri power,rated at 401 hp
Isn't that what you all use ??? Most of the drawers have stuff with no reyme or reason , look organized on the outside and mixed up as anything on...
I will start to see if I can get a name ,I had his number from another purchase I made from him in the summer but not sure what I did with it
Just looking to get the motor put back together as cheaply.as possible , ran strong ,actually going to detune it more for the street. Was running...
Don't think very highly of Don Palmer !! Wouldn't recommend him to anybody.. not that he doesn't know Fe's !!! Thanks Jeff
Have a kodak film cabinet big drawers ,and lots of room ,doesn't make my organization any better but sure hides it LOL .Also another office type...
Been looking at the sealed power 3/4 groove main bearings Clevite 77 p rod bearings with grooved upper shell.
It sheared the roll pin on the distributor as well ,but being standard rolled to a stop tried to start it , didn't know what was up till I pulled...
Separate names with a comma.