The Jalopy Journal
Poor customer service for sure. I have a few cars, and I will never ever buy a Isky camshaft again. Any camshaft except Iskendarian cams.
Still nothing, not even a email. Not a happy customer, thats for sure
Well still waiting for a reply from Nolan at ISKENDERIAN cams. First he couldn't find the cam, then found it, and now its been a few weeks and...
Welded lobes, well if they were, then they were done by ISKENDERIAN. I open the cam out of the box and plastic bag,before I installed it into the...
Well its been over a week, still not even a email stating that they have received the broken camshaft. I thought the very least they could have...
Behind the middle cam bearing. What a job taking out the remaining part out of the block
No, the holes are for keeping the lifters from turning when you set the valve clearance, by inserting a small pin punch thru the hole and into the...
26 sedan,cut down into a pickup cab, sitting on a A frame. Plan on using a 32 grill shell, cut down. Flathead powered, Transmission, Lincoln rearaxle.
Hi all, I have a question. A few months ago I bought a Isky camshaft for a Ford flathead I'm putting together for a project. Anyway, after I...
Hey all, I was wondering if anybody would have the measurementsfor the locations of the taillights, door handlesand windshield wipers for a 40...
Thanks Don, I will do that. Hey are you coming back up to the Big Go this year at St Thomas dragstrip?
Hey all, I was wondering if anybody would have the measurements for the locations of the taillights, door handles and windshield wipers for a 40...
thanks, yes it's a gasser.
[IMG] finished, 392 Hemi, Doug Nash 4+1, Ford 9" with a locker
http://i129.photobucket.com/albums/p221/L79_Acadian/A40%20Austin%20pickup/20170726_155134_zpslq4satdd.jpg
[IMG]
[IMG] [IMG] I'll be there in 2018, with the truck this time. The truck will have some color (Lopez Lemon Yellow)on it and some new lettering by...
The truck is a 1949 Austin A40, and the other is a 33 Willys, and the 160" front engine dragster too
[IMG] Have some new Torque thrust D's for the front and a fiberglass front end to install too. [IMG] [IMG]
[IMG] my 49 Pickup gasser, its getting closer to being finished. The goal for this year is to have a complete roller, just waiting for a power...
[IMG] My 33, street gasser, still have to letter it up, calling it "Tortured".
[IMG] my 33 gasser, street car. blown 392 Hemi, Doug Nash 4+1 tranny, Ford 9" rear. It might be fore sale too.
Ok let me explain more. The pistons that came with the motor are Jahns forged pistons. The problem is the compression ratio they make. Its to high...
Hi everyone; I have a old 392 hemi, that I bought a while ago. The motor was apart, and I never measured the cylinder bore, prior to purchase....
A work still in progress. Its going to have a blown 392 and a Doug Nash 4++1 tranny. Posted using the Full Custom H.A.M.B. App!
I wouldn't let Cambridge chrome plate anything for me again. A few years ago I took some parts from my L79 Acadian to be plated. I offered to...
Biggo,how come the lettering is only in English? I thought signs down there had to be bilingual?
Hi all, I am about to weld the radius rod brackets onto the axle for my slingshot dragster. What caster angle should the axle be set at?...
Separate names with a comma.
The Jalopy Journal
