The Jalopy Journal
Yep it’s pretty beefy looking sitting beside the T86
Thanks for the reply, I think I have read some of your articles on these.Like I say I think it’s to much cost to switch since I am running a 275...
Steve.. looks like shifter will have to be moved to the floor, linkage is different crossmember mount different driveshaft will need shortened and...
I’m trying
Will sell outright but would rather swap if anyone in close vicinity. This setup won’t work with my 292 in the ranchero without a lot of changes...
In kind of a bind on my 1957 Ranchero. My overdrive unit ran dry and was toast. So I found a nice T85 and R11 from a 57 t bird instead of the T86...
Anyone ever seen an outside sunvisor on a 57 Ford passenger car?Or maybe anyone that builds custom visors?[ATTACH]
The Weld contact cement in the quart red and white can is what I use.Works great and is easy to get.about 10 bucks a qt.
Here's mine guys.Early 90's volare front end swap,ford 8" rear, Chevy powered with white tuck n roll.She's fun. 25,0000 miles on the build,still...
Pressure relief valve in the oil pump,ask me how I know.
don't remember for sure where the kit came from,maybe Chassis Eng. but I had 1972 Camaro discs on my 35 pickup-on the original axle/spindles...
They are all rectangle shaped flat glass except the windshield.Had all of mine made by the local residential glass shop.They used a grey tinted...
65 mustang buckets are the way to go.They look good 'cause they have a short backrest.New covers are avail. online in many colors.Any late model...
Hey,IF youve got a long pump on her,I'm 5 mi up the road and have one setting right here on the shelf.Be glad to help you out.
I've dealt with them on quite a few odds and ends.Always been pleased.Some of the stuff,like the distributors,are made in you know where,but are...
Other than the Hawiaian shirt wheels,mines mostly finished.4'' chop, chevy van roof,shaved drips,filled visor.20 gal. poly tank in the rear.Single...
Mask the inside and top of the fins, one at a time and paint the grooves with a small brush.Gets kind of tedious buy only takes about an hour...
54" is mostly industry standard on vinyl products.Carpet and pad are 30"
Here's my 35... Looking to swap for a model A 2 door sedan.Whatcha got?
Yea,known Terry for years.I happen to live up the road from him.He used to own the Harley shop in Zanesville till about 1980.Most of the cars you...
Separate names with a comma.