The Jalopy Journal
I used thid several years ago, and if you are doing more than repairing Beer Cans you need more heat. Put some tabs on 1/8 inch plate about 4 X 6...
Is your reluctance to the manifold location due to the location or do you have to modify the manifold? How about a thermostat housing, mounted...
Have a look at a 87 to 90 chev C10 slave cylinder. It is 3/4 inch used on the 4.3 V6 but V8 is probably the same. It is mounted on the...
I don't intend to build something that is not safe, just the opposite. The aftermarket U-Joints have never impressed me. Ford, GM or any...
I am working on my 27, installing a Vega steering box. The 5/8 - 36 spline is a problem , The Corvair and Vega share the same spline but neither...
Make sure the steering arms are forged, if you attempt to drop them a bit. I wouldn't ty it with cast arms.
Is the 7deg a standard for all automotive, or just Ford? I have used old idler arms to make bungs when I couldn't find a source of a reamer.
I just purchased two 165 80R15 . replacements for the old VW Beatle 6.00 15 tires. I believe they are 27 X 5.5 . Most sales people have no idea,...
That is a 39 not a 36 looks good!
I ran across a fellow in a 23 T that had a 3 inch rear view mirror that fastened to this left wrist with velcro straps. Very adjustable and...
West of Cow Town
The transmission came with a round rubber mount that had a single stud mount on the bottom. The transmission casting had two threaded holes. I...
Well it sure appears to be the same trans. I had a quick look, removed the shifter tower, and it appears to have only one rail, about one inch in...
Same as the unit going into my 27 Ford. I was told that 1st gear would be LOW but with the over-drive in 5th it should work well. Will be using...
Do you have it plugged into an extension cord? If it is a small gage extension it can also cause problems.
Pete I noticed your headlights have been converted to sealed beam or halogen, at least not original lenses. What was done with this? I havent...
I believe these units only gives additional lift on acceleration, increased weight transfer. It allows the upper control arm more movement, but...
Try Meguiar's Hot Rims aluminum wheel cleaner. Spray it on, rinse it off with water. Remove a lot of gas stains.
Ski shocks for snow machines work that way, little resistance on collapse, high resistance extending. I found some nice, shiny, small sized ones,...
Been reading this site for long enough. Time I joined. I have been into cars, trucks, rods, bikes, anything mechanical all my life. Presently...
Separate names with a comma.
The Jalopy Journal