The Jalopy Journal
Did not pull the manifolds, bought the correct spring compressor instead. Just about have my valve puller welded up. Family/Electronic...
Yeah someone has to do it, and not to many people do. So I try to welcome a few who have had 0 replies each day so they will post further. If they...
Is the tool that you have a slide hammer type that hooks under the valve head? I set out to make a slide hammer valve puller but was worried about...
Good point on the dremel, I AM going to have the valve bay clean as a whistle before I am done tho, still, the dremel is out...Yeah I would love...
You sound like a H.A.M.B.er to me! Welcome!
Glad that you finally joined!
Well then you have hit the right site! Welcome aboard!
Hi there Jerry, Welcome to the H.A.M.B.! Steve
Welcome to the H.A.M.B.! I would drop it, flush it with water, put a few feet of chain it there and shake the piss out of it and rinse with water,...
Yeah I got my post count fair and square;)! Not one of these guys that just goes and posts one word replies on EVERY thread. I got a good 20 just...
"Try putting a piece of wood, plastic or aluminum between the valve and lifter and turn the engine over." I like this one! Good stuff, thanks!...
Squirrel, what's up man!? No, this is one of the "un-stuck" ones. I figured that I would start with a few of those so that I would know how hard...
So what is the best way to get these bastard valves out? I put corks in the drain holes (even the 2 small hidden ones) started with a valve that...
You sound like a H.A.M.B.er to me! Welcome aboard!
Got it, bout to go see what I can tear up!
x2:d
Welcome to the H.A.M.B.!
Sounds like a project. If you post a thread in the main message board with some pics I am sure you will find plenty of help on here. Welcome!
Welcome to the H.A.M.B!
welcome aboard!
Lets go argue on a different post at least, the OP's question has been answered like 5 times.
Who told you that, your wife? It just kills anyone on here with more then 1000 posts to ever be wrong about anything. Funny as hell tho!:D
Welcome to the H.A.M.B.! Fleabay will probably have the buttons for you.
Welcome to the H.A.M.B.! YOU CAN CHECK THE CLASSIFIEDS ON HERE OR JUST START A THREAD ON THE MAIN MESSAGE BOARD WITH SOME PICS AND WHERE YOU PLAN...
My Packard is why I am on here and there is nothing "Pro" about it! lol I know that it pisses people off when people get on here and talk about...
P.S. A "Pro Street" car is a drag car that still has plates and can be driven on the street. They typically have a narrowed rear axle and wheel...
Of that I have no doubt!:) That is one of the reasons why I am here. When I see BS that I know for a fact is not true, I call it! But I agree that...
"Volumetric flow" (google it!) is not marketing, it is also something that people who don't race, or know guys with dyno's, would not know the...
YUP!!! That is how/why it works! The only down side as Squirrel pointed out is that they are ugly as crap and they do speed up the header rust...
Lots! FAST ones too! the one set made it thru three different motors and were used (THICK HOOKER HEADERS) when I got them. I really think that...
Separate names with a comma.
The Jalopy Journal
