The Jalopy Journal
Nice looking 53 Weirdrum
My 54 coronet moredoor.
I have a weldmark 140 it has the gun and face of a hobart handler 140. Been pretty solid for me doing sheet and lower gauge structural.
My 54 dodge has one as well. The scoop has a metal passage that lets cold air pass the radiator towards the top of the old oil bath filter. Its...
Statefarm add "I could have got a falcon" http://youtu.be/FZMWMbRChuA When I lived with my parents we had lots of mice and snakes living in my...
Glad to hear it.
I don't remember ever replacing a stock one. But after my accell burned up and had oil all over the neck I looked more closely and discovered...
you mounting it horizontal on top of the intake like stock mopar? Probably losing oil. Had similar issue with my 241 toasted two in very little...
I've gotten crazy parts in less than a week just posting what I want in the classifieds here. Fender and rocker assembly for my 54. You would be...
Nice..
Here is my lovely pic
Thanks Merc beat me to the punch on the solenoid part. When the solenoid built into the starter is bad you will get a Wiiiiiirrrrrrrr all spin no...
I wish I could spend a little time with your system and a volt meter/light. Not all ignition switches work the same, that's why the mopar on has...
I'm starting to wonder about a couple other variables on your system. depending how you system is switched you need to make sure that you are...
Since nothing else on yours is mopar, I'd put in a ford style solenoid instead of the relays like 50dodge4x4 mentioned, run a heavy line to the...
the one to the the bolt is very heavy, and the one to the small switch is heavier gauge but not like the ones that normally run a starter. If you...
Since you do not have the rest of the mopar ignition system the solution posted of just using a solenoid to both may be the easiest way in your...
Here's a pretty clear diagram of a stock ignition relay setup.. [IMG] Hot linked off a a google search. The purple box is a stock mopar...
I can see the bonus of not having the main wire hot all the time. I have had one hit the exhaust manifold and short out. However, I wouldn't say...
Seconding the 318/360, good power and cheap/available. If you shop right you should be able to get all you need for Electronic ignition from a...
Probably means this not full pressure, but full flow to the oil filter? http://www.hothemiheads.com/dodge/oiling_system/oil_bypass_plug.html and...
Sadly I'm in a rural area far from any hemi builders. This shop was an old time machine shop with a good reputation, but now its the son doing it...
No missing metal. The cam is clean as is the oil port. All metal damage was downstream so to say, up in the rocker assembly, and I have a new...
Sooo I have an idea, possibly a bad one. I have a state run at the bearing. I'm tempted to drill out the hole with a long drill bit. Not sure...
shop rat, its broke but kind of ok. He kept the in holes lined up, but neglected the out to heads that these engines have on the #4 He got #2...
Ok here's the update. The problem this engine feeds engine to the heads through the cam on #2 Driver #4 Passenger. The cam bearings on these...
At this point I'd take use of a cam bearing tool, and chalk it up to learning.
Found the problem. Its better and worse than expected in some ways... The machine shop installed the #4 cam bearing aligned to the wrong side....
I have a spare 4 door front window, but I'm in PA and likewise concerned about the rocks around here. Although once you have one in, its...
Both were dry. But the exhaust was really bad. Nothing getting to the top. There is even rust in a couple of the lifter to pushrod pockets.
Separate names with a comma.