The Jalopy Journal
That guy Ruled! May He Rest Easy and You find Peace. Thank you for the photos. That RPU was Spectacular. -TERPU
Throwing this out there - I do like this Truck. It's Bitchen' but it's flawed. You see it's major hitch is the fact it has a Top on it....
[ATTACH] Well, I'll just leave this here ;-). Perfection
This is Ron Dunn's '40 that's had a Carson Top since '62 ish. [ATTACH] [ATTACH]
Well, Build it tight. Remove tolerances up to specs. Take all the "slack" out before hammering it and you'll be just fine. Understand what...
bump
B&M Blown SBC. I bought this a few years ago for a project. Never got around to using it. This was removed as running and driving combo. 350 SBC...
Yep, the K Member in a '32 is the same spot so the driveline from there back is =. Good Correction. '33/'34 is where the challenge lies. I...
You are going to run into Driveshaft challenges. The Torque Tube and Propeller Shaft are shorter on a B than a V8. This will put the V8 into the...
Sorry Amigo, I don't have that picture anymore. But they do fit right on there. A '28/'29 Grill fits a T well on an A Frame.
Someone in Bako or a Music Row Guy to preserve it then I’d understand leaving it as-is. However I’d be completely OK and for someone getting it...
I know this is the wrong pile source of parts, but............. They are still available new and are much like a Willys. [ATTACH] Another...
B&M blown SBC & TH350. Ran solid when pulled. Pulled to install a flathead and '39 Box 20 years ago. Been in dry warm storage in Santa Clara....
[ATTACH] The latest heap to make it's way to the Ranch
Use a Masonry Bit and turn it slow with cutting fluid. This will also work on Chrome pieces if you are very careful. I found this tip on the...
Set one side, have your friend pull the other side into place and set the Perch in there. It's been pretty common for the wishbone to spring back...
My Friend Ron's '40[ATTACH]
This Post. Quit 'yer Bitchin' and get to shiftin' - Tim
The first Three Window. Change my mind. Hahahahahaha.
The thing about having one of these is that it just gets better and better and better.......[ATTACH]
I am glad you are doing better health wise! I absolutely love the Van, and both admire and respect your flair. Having an Individual Spirit...
Realizing it is your car, whatever makes you happy do that. Looking at it through my eyes (opine) here's what I'd have to do. Buicks are big...
I've been searching most of my conscious life for a '59 ELKO and this thread gave me the push to set it "right" [ATTACH]
Great GOOGLY MOOGLY! Love that Car. Bravo and well done
Good ground as stated above. Also clean the points. The electronics work a lot like the points in your Crab. That's how they charge and cutout...
Well, I can't help it if your a Quitter..... ;-) Trust me I understand completely and I am only 50. But the point still stands, if it's...
Looks Great and Love the Project! But get you some Roadster Cowl pieces to get rid of that C'Dan transition and then narrow the Doors to fit,...
If it's getting stuck the linkage needs adjustment or the Trans is going Bad. Could just be a simple fix. An Automatic is no smaller in diameter...
Bravo! That's some really nice work.
That's pure Stoke! I admire your ability to keep going after it, makes me shiver just thinkin' about it.
Separate names with a comma.