The Jalopy Journal
Working on a T5 behind a flathead in a Model A. Does anyone make a kit that extends the gearshift further forward to where it should be...
Wanted to post progress build pic/s for perusal and advice and criticism from you fellow hot rodders . BUT, Ryan's guidleline for this...
Am working on rear end on a 28 model A transverse spring 5 link rear using radius rods lowers split to chassis and radius rods...
About to start on the split bone front anchorage point on an A chassis . Looking for pics of fabricated brackets to the chassis . Using...
Up to finishing the pedal layout, AV8 model A frame. 39 motor and toploader RHD , using model A pedals hanging off the right side of...
I only have the gearbox spline/yolk and need the front yolk part at least of a matching tailshaft . I have no idea what this open drive...
Do you have any graffiti or old decals or anything a previous owner did to the car that you do not want to paint over ? This is my 28...
Thought this would be easy, but cannot seem to find it anywhere so far. Need heavy walled seamless pipe 5/8th ID minimum 7/8 th OD....
Modern variety... if I was to heat and bend within 2 inches of a tie rod end, is there anything inside that is susceptible to excessive...
Have a flathead and 35 box to go into a model A chassis. Don't have a diff, but will prob get a stock model A diff to make it a runner....
What year were these on ? Is this the best way to clear an under wishbone track rod on a 4 inch drop axle on an A chassis ? I beam is 2 1/4...
Am building an A hiboy fenderless roadster, (so light in the arse ). Have read here that a T rear spring is the best. Have located one afar,...
RHD with tie rod under split wishbone. With this on the left hand side steering arm, it looks wrong. I can see this fitting on the right...
28 hiboy fenderless roadster. Any tricks to fitting a T rear spring to a stock rear A arch , including tips on making up for the difference...
OZ RHD hiboy A roadster . May or may not use the cowl tank as a fuel tank , but in our state we have to have a collapsible break away...
About to get back into my fenderless A roadster hiboy project with Model A frame and rear spring and a 3 inch kickup at rear. Am using a...
Doing an A chassis flathead, traditional I beam, what is the ideal height at front to aim for. I have a distance of 5 1/2 inches from top...
What year was the last ford tie rod end like the model A with 2 cups and a spring pushing on the ball , before they went to a normal modern...
Has anyone got a 29 1/4 inch C to C leaved ( not mono ) front spring ? I would like a measurement of it out of car . If it is exactly 29...
I have an 11 leaf A front spring in as new condition which I put under a mockup chassis with engine and gearbox in and jumped on it . I...
Is there any difference between early round spindles and later square ones, except for the length of kingpin ? For OZ builders , the...
Will these headers work OK in an A V8 39 flatty in an A chassis with non side steer ? [IMG]
Dumb me bought some so called 40 gear in a rush. Finds out the 40 front spindles are LHD Actually I don't even know if they are 40, is...
gday all, this is my rainy day project and the rain started 2 days ago...it should be an interesting winter.. It will be an A chassis...
Have a 38 21 stud with 4 speed truck gearbox. Will a car gearbox bolt straight on ? If so, is the clutch and all else the same or do I...
Finally got some room to throw some parts together for next pending project. 28 hiboy roadster on stock shape chassis. Are there any books...
I have just acquired what I think is a 38 motor with 4 speed truck box. Is this box any good for hiboy (car use ) ? Has it got...
In a month , I will be back with a 38 motor with alloy heads to begin my 28 A roadster V8. The heads prob never been off, so is there any...
Is there anything in particular to look for when inspecting an old as found flathead that turns over but does not run . Has been decades...
gday, I see a cheap 21 stud flattie close by with water pumps in block, cast iron heads and outlets in head middle. I think this is a...
Separate names with a comma.
The Jalopy Journal
