The Jalopy Journal
check piece with a magnet, if there is an attraction its a higher iron content stainless and probably flash coated with chrome
http://www.spdexhaust.com/U-bendsB.html
second suggestion post 4 ?
1914 Castagna Alfa
zip wheel or plasma cutter, your only going to lose an inch of the 12 g, remake the top as a unit. The wheel opening should be no problem, parts...
I hope you expectations of fixed are not really high, you have a flat panel, no crown anywhere and a heap of shrink locked under the 3/4 flat bar,...
if you can't actually point out what was wrong thats ok, but seriously? just flapping your gums and running me down dosen't exactly point towards...
great spew, what alternate universe did you cross over from?
only some powdercoat colors are UV resistant and they oxidize pretty quick, it does not flow out well so there can be texture issues, dosen't sand...
damn, concurrence, can't be good lol
that flux is an acid cleaner not a tinning flux, sure fire paint issue. Mixing lead to make body solder, antimony is added to body solder to keep...
this is why I don't do woodwork, the uglies in welding can be cut and tossed and nobody can ever tell
a wet rag will make it shrink and you will fight it all the way, the moisture will cause rust. If its thin on the original you could try pressing...
Aluminized... This is cold rolled steel that has been continuous hot-dip coated with aluminum-silicon alloy. All thicknesses of steel processing...
here
sorry yes the op (just hate filling threads with reposted pics :D)
the "skin" on the panel is locked by the edges, upper body line was damaged? looks like the bottom rib is slightly rolled in at the lower right...
just wondering how long the face is going to stay on? spring steel to mild steel is not always a great bond, do you have any youve worked for a...
just acid? or like redistrip.. caustic for paint, reverse electrolysis for rust,a rinse then a phosphate dip?
body shop teacher hired me right out of school for his shop, 5 years of pure hell till he felt I was "trained" no bondo just metal finishing and a...
for a "first" panel? lol print the pictures and frame them! off to a great start
don't know if this will help but HERE is a link to an E type jag horn setup, look at pic's 3 and 4, maybe you can wiggle this in there?
hmmm, tramp stamps don't work on these either lol
1 for charging 1 for starter draw
austin a 40 devon?
its an anti hacking/spam setting to prevent "flooding" don't want anybody filling the house with porn do we?
fuel pump ?
Mindover, thank you for showing your skills, everything shown is what one would hope to see from an accomplished craftsman (though rarely reveled...
don't know if you can get this over there Tremco we used it for our life time rust repairs
there is one that looks pretty good (closer to dull nickel) BUT 1 big problem, once you touch it it starts to go gray, basically its useless, if a...
Separate names with a comma.