The Jalopy Journal
The residential dish washer will not hold up in the long run if used for washing engine parts. The pump and hoses they use can't take the...
Looks like they heated up the springs with a torch to lower it. The leaf spring pack has the main spring then another spring the wrapped part way...
Are you using mineral oil to get the gloss? Sent from my SM-G930V using The H.A.M.B. mobile app
I have a couple of them kicking around, I think they are part of the old tach drive of the distributor. Sent from my SM-G930V using The H.A.M.B....
I would guess it's a late 28 early 29 two door sedan. You can measure the door opening to help narrow down what it was. Sent from my SM-G930V...
Have you verified the brake actuator rod is adjusted to allow the mastery cylinder pistons to fully retract? Sent from my SM-G930V using The...
Do you have your lines reversed at the master cylinder? Sent from my SM-G930V using The H.A.M.B. mobile app
I think Henry would agree, he moved the spring to front on purpose. I have a 32 axle with 37 bones, spring in front. Sent from my SM-G930V...
I have used vinegar to remove rust from marine manifolds before, but I completely submerged them in a bucket. You could try taping off the gasket...
I picked up a 49ish truck a while back, had some "extra" stuff in the bed. I don't know what they are for or if they are even parts to a...
Nice metal work, not a fan of the running board execution. These trucks don't have many squared off lines. I like the idea of flipping the...
Welcome from CT. Posted using the Full Custom H.A.M.B. App!
Got a late start, my uncle and I went and brought a friend that had never been to a big meet. I left with a decent model a radiator, just need to...
I picked the body from ThrottleJockey, things were progressing nicely until I got the floor cleaned up. Going to end up replacing the the sub floor.
reading old post on another forum and found this link, some may find it useful....
Do a search on google books will come up with several books where it is mentioned but no books dedicated to it....
If the delrin has a lower coefficient of friction it will run cooler and have less wear. I am looking for case temp not so much air temp, I...
I have been searching the web but have not been able to get a decent answer. What is the temperature the would be called "normal" for a...
I was cleaning out the attic and tossed some old cheep steel cabinets, an old sticker fell off when I moved them. I have never seen or heard of...
I don't, too high and pushes the seat forward. The Photoshop job Porknbeaner did saves me some time of doing a cardboard moch-up, not sure if I...
Damn, its hard trying to be innovative in a culture that has been around for 100 years and just about every thing been done. Card board...
One of the projects I have been working on is my uncles 1937 ford truck. He will not let me chop the top at all. Sitting staring at it one day and...
Nice looking project truck. If you have an amp gauge, that would be the first thing I would yank out of the system. Solider and heat shrink as...
The isuzu rodeo's ran a dana 44 with a standard 6 lug bolt pattern.
Working on the fuel system this weekend, the tank was just sitting in the frame. Looking on line the tank is held in with 3 bolts and one has a...
Without cutting it all out and starting over, replace the outer tie rod with a heim joint so it can be spaced down. It will be limited by rim...
Nice find, I wouldn't mind having on in my work stall.
t may have been mentioned already, but ford runs a electric A/C compressor on their hybrids. I looked at the price of one 3 years ago and it was...
Look into marine deck hatch hinges, they come in a wide verity of materials and styles.
I started with right door, found some spot welds. the skin seams to be bending back OK but the thicker inner structure is cracking where it is...
Separate names with a comma.