The Jalopy Journal
far from an expert. very little experience with th 6 banger. but, the cam gear is aluminum and needs heated up to remove and reinstall. forcing it...
but is it the cam itself or loose cam gear? dont know if anything at rear cam bearing keeps it from traveling back but the front mounting plate...
the 4 barrel carbs rotate farther than the monojet. if i remember correctly, 78 degrees on q-jet and 60 degrees on 1-barrel. this is farther...
if you still need measurements, let me know. i recently installed a 700r4 behind a 250 and saved all the measurements. an 1/8" off makes a difference.
rog, cant really offer advice on that, never heard of that either. i am, however, very interested in your build, including what went wrong. i am...
drill out the welds on the doghouse and bolt it back in when done. good time to go threw the wiring, only a few wires and the 8 pin connecter is...
planning to do the same swap. 292 pass. side mount is moved, easily corrected with a peice of flat steel and 6 bolt holes. you will need to run an...
what size cam? ive heard good things about cliffords 264 duration but it is only 206 @ .50 and cant help but wonder what a little more duration...
i have a 292 chevy i plan on rebuilding for a '64 chevy van. want to run pump gas (92 ok) so compression needs to stay under 10:1. i am...
researching info on 292 chevy and was directed to h.a.m.b on numerous occasions. lots of good info and reconized a couple names. i have a 1964...
Separate names with a comma.