The Jalopy Journal
I would check that number stamping real close. The F3 had a longer and heaver frame then the F1. Is the plate still inside the glove box. If so...
I have worked on a lot of SBF and never had that issue. The only thing I can think of is maybe the torque converter maybe not be seated into the...
Yes either sender will work. Most Fords up to 1989 used the 73 Ohms empty to 10 ohms full sending unit. Which Fuel Tank Sender Do You Really...
Would it happen to look like this. This is an early Ford T 10 four speed. Ford change to the wide bolt pattern in 1965. There are some top...
You said you want to change the cab. Go find a truck with a clean title and matching Id number. Change the cab and part out rest of the truck....
Should not be that hard. The power rack will bolt in were the manual rack was. You will need to change the joint at the steering input shaft. The...
If it a pre 1981 block it should be a 28 balance flywheels. But some have used the early blocks with the 50 oz balance. Reason being the later...
It not that easy. the 390 is internally balanced and the 428 is externally balanced. Plus you are going from a 3.78 stock to a 3.98 stock which...
Yes make sure they are metal heads and not plastic. It pays to pay a little more for a good fire extinguisher.
Being a retired Fire official and part of my job was fire inspections I figure I would give a little info on fire extinguishers. Like it was...
Lehigh Valley about 8 miles south of Easton right along the Delaware River. Bucks County I was there walking around a lot of car again this years...
Far as I know it still a go. The bridge commission is opening the reigelsville bridge Sat. and Sun. just for the show. It about 8 miles from my...
Some are saying it could be the small block 406 crate engine. But I can not see anyone trying to but a small block in a 65 T-bird engine...
I been told it will work but they are narrower then the 48. I found out the hard way when I put a Chassis engineering Mustang II for 1942-48 ford...
Yep. Seen some turbo 350 bells break because of this.
Its a 76-82 GM V6 5 speed "T50" good to about 200 HP.
Nice buy and a nice car. One question How did you get the title? I been battling with Pa. for years over title issues
This should help you id the trans.
If the trans is a 1963 it is either a Ford-O-matic or a cruise-O-matic [IMG]
I was wondering the same thing. The 221 and 260 were introduced in 1962, the 298 was 1963 and the 302 was 1968
do you have the numbers after E0AE?
Some of the early M engine have the same mount as the Cleveland. The other have a 3 bolt mount. Look at the side of the block if there are two...
Why not just go with 2X4 tubing, Faster, cheaper if you count you labor into the cost and safer. Nothing like your frame coming apart at 60 MPH....
If you have a 1962 block you will have to find the cast number on the right side of the block. It should be about half way up the block. The Cast...
Check your Id number against this site. http://www.vanpeltsales.com/FH_web/flathead_serialnumbers.htm That way you know least what year the ID...
Setting here watching it snow. There calling for 3 to 6 and everything is white and the salt truck has already been through. 1:30 PM. I have a...
There was one showing up at cruises and shows locally this year. It looks like the same car. I am located in Eastern pa. Lehigh valley area. The...
Use them for years. always fast and ready to help. I had issue with two parts I got from them. Made call and they fixed the problem fast.
So is the dollor amount. If you look at the date it matches the rest of the font. I bit the money order was for less and that someone that lives...
I will only accept paypal, U.S. Postal money orders and cash. Even with U.S. postal orders I take them to the post office and ask them to check...
Separate names with a comma.