The Jalopy Journal
Thanks guys, I can't take credit for the chop, I bought it that way. It had billet wheels and a 305 Chevy. I'm in the process of putting a 53...
Got the cab in place tonight, if you look closely you can see the 53 Cadillac dash install in progress. [ATTACH][ATTACH] Sent from my LG-H343...
If the Buick transmissions had dual range drive selector(65-67?) it would give you the option of using the switch pitch converter with the...
It probably is, I've seen it called the "Buick borrowed" transmission.
Find a 1964 Cadillac DeVille. You'll need the transmission too as it is a one year only bellhousing. You'll need the starter, and starter bracket...
It's from a 1964 Cadillac Deville
61 Cadillac 390 to 64 400 transmission, ready to start building mounts. [IMG] [IMG]
64 Cadillac TH400 to 61 390
61 on the left/64 on the right
My 54 Chevy...
Borg Warner T10(3spd) with R11 O.D. gives you 5 forward gears if wired correctly, Ford used them for years in some very high torque applications....
I looked on the coker site and I don't see a wheel that looks like these two. I read in another thread that coker took over the Roadster brand,...
HOK... a flake/kandy job is a lot of work. It's worth the extra money. Any one of the their urethane clears(usc01) are designed to have a high...
I know it is a great deal of work and I haven't tried black candy on it, but, HOK F-20 red flake is an incredible base to work with. I can tell...
Just bought a 63 and a 64...
Is the swap meet this weekend?
SlickRick is correct, only thing I would add is to be very careful not to sand through the clear...
Found these in a pile at a local used tire dealer...10 bucks each. Wire wheel on a 4 inch grinder, a little 220 grit, 3 coats of alkyd...
Lighting is not great in the garage yet.... There she is... The 7.50's are tall, I had 205/75/15's up front, the 7.50's are taller, about the...
My 54 has an AMC Pacer front end(used dodge diplomat steelies) and an unknown GM rear axle( 6" or 6.5" wheels) I had to space the rear out about...
Here is a picture of my 54 w/ new wide whites.
I need a manual for the Sun Scope model 510....
After reading the HAMB for so long, I thought it would be a good time to join. I'm starting a new project, a 37 Ford pickup with a 312 Y block and...
Separate names with a comma.
The Jalopy Journal