The Jalopy Journal
Really no one can help with this - I know some of you guys put these in the category of fake breasts but some of us are of with those as well ;)...
Could be ................ In another of Bubbas posts he said .........." The vertex style cap can be converted to a external coil wire with a...
I know this is an old post, and BUBBA is gone (RIP) also that I should not have bought one of the Joe Hunt mag look distributors but I did (even...
I share your sentiments and it shows great strength of character and perseverance on Steve's part to keep going but man I wish he would learn from...
NealinCA beat me to it. If you think you might give it a try then reread NealinCA's post.
I would install the firewall on to the chassis first and then drop the body on. I know that is a pain to do but if you install the firewall to...
I suspect you are likely to get a lot of replies to say use the end gaskets ............they must be good because that is what is supplied, they...
Thanks guys it would be my luck that in times of need I would always have the wrong one showing!
I did not know this but it certainly makes sense now you have explained it. Following on from your knowledge and understanding ............. can...
If it was mine I certainly would not run it. If it disintegrates it is going to do a lot of damage and I certainly wouldn't want to be standing...
Sorry for the thread hack DOUGLASB but as it looks like your issue might be solved I hope it is ok to enquire about your...
I had a similar issue with my classic gauges oil sender unit (it would not clear the floor / firewall section) so I purchased a small piece of...
Post hack but sort of related ............. times they are a changing I went to my parts store yesterday and asked for a 1.5 ohm ceramic ballast...
28/29 A radiators are approximately 2" shorter than "improved" 30/31 A. As already stated by wheel tramp Brian the 32 will fit the 30/31 but...
Not sure of its age but I purchased this one of ebay for a reasonable price then added a non traditional 4" led instead of the glow worm globe...
Hi, C4 to flathead has been done many times but you might want to get some additional advice before going with a 2600 stall on a street flathead....
I have seen this done before so its not a new idea so here is my take on the old esky into a battery box. It is going into the bed of my 32...
From almost day one the vision for the pickup was to have some artwork on the side. A big shout out and thanks to Lock Leers (a new guy starting...
Thanks for reporting back. It only takes a little slop in the steering components to lead to all sorts of problems. Given that it didn't have...
Hope you are back to good health soon - here is my work in progress [img]
Here is one for inspiration - I had the same concerns as you. I cut down the wheel to 15", repaired it and bought the leather cover from ebay for...
Thanks for the pics prices and commentary all are very useful for those not in the area and considering Pomona for a visit.
I didn't just want to use a stainless overflow tank on my pickup so I bought the fire extinguisher on the left. I thought it would make a good...
On my pickup I have used this serving tray as the dash dash facia panel [img] Here is what I ended up with [img] I used some of the excess as...
That is a great idea - thanks for sharing.
Yep listen to this man - an 8BA flathead does not use the timing of later model OHV engines.
Is it built as a left or right hand drive? The reason I ask is because I think if it is right hand drive then it needs to be converted to left...
Yep x 2
Separate names with a comma.
The Jalopy Journal
