The Jalopy Journal
Camping at Hershey and picking up parts.... Yeah Hoo
Drop the front end, steering wheel, finned valve covers, may be some stem mounted taillights. Good trade
Latest on the weather for Hershey----as of 10/01/2011 Tuesday rain tapering off, Wed, Thur, Fri, Sat, Sun. cloudy with partial sun, cool nite time...
Build it and they will come!!!
Hey and it even comes with a dick splint!!! :-P
Jumbo Size for the Big Rig! COOL:eek:
If you've built chassis before then you should be able to tackle a ladder frame style such as a Model A, you just have to be aware of the angles...
If you find a vo-tech school near you, their always taking on students, I wanted to paint cars so I enrolled in some classes, 30 years later, I'm...
I just want to send a thank you to 2 Hambers : 28ModelA and kb cookout for the quick response to parts I ordered here on the H.A.M.B., feed back...
Translate the Italian instructions on-line with Google translator
It worked !!!
Whats up with the lower corners of the front glass ?? Or is it not seated yet. She's slick
Welcome from Wild and Wonderful West Virginia, that should be an interesting build. Dasvidania
The red/black was a factory set up. I have an unrestored 1946 Pontiac fastback, black body, red steel wheels, rings and caps (blackwalls)
Welcome from WV, nice ride, with it low like that, with the roof line it has that early impala/ cutlass look, SWEET, if you can't find the spyder...
You've come a long way, your Dad will have a ball, let him take her for a spin and you co-pilot!!! I see what your talking about with the upper...
@ Keep, you want the adjustable valve closest to the brake your dropping the pressure at, putting the residual valve closest to the master just...
Clevername- Prep- sol, yes the wax and grease remover. Once that POR is cured you should have no air getting to the metal. Oxygen = rust
[IMG]
Did one years ago, kept the braces in, take your time, weld a spot, move to another area, weld, other side, etc.. before you know it, solid weld,...
n847, you might want to see if you can find another front end before you dig into all that mud in the front end, there might be a can o' worms in...
Hit that with a red scotch brite pad, blow them off, prep sol, and POR
Get yourself a few rolls of 1/4 masking tape to do your outlines with, it curves easier, and just for shits and giggles, get some water based...
fiddy onez
Since we're jerry rigging, cut your pattern 1/2" larger that the grill opening, if you want to peak the center, form that over the edge of a...
Looks like a long front end, pancake a 46/48 olds hood, reshape the grill opening to fit the olds grill, glass the rear 1/4s for Packard tail...
Neither are 28'/29' Ford P.U. The pick up doors have one body line below the window belt line. It's about 1"1/4 tall and is not rounded at all....
Pop off the fenders and go blackwalls, with the hemi (MEAN) but the whitewalls a cool too! Are you running 8.00 15's and 5.00 15's
Separate names with a comma.